LX800-LX810
How do I change/install cartridges in my LX800?
How do I change/install cartridges in my LX800? Ink cartridges are changed as follows: 1. Click Start - Printers and Faxes. 2. Right-click on the Color Label Printer Icon. 3. Click on Printer Preferences from the drop-down menu. 4. Find the option ...
How do I change the print settings/preferences on my LX800-810? What do they mean? (PC Only)
LX800/810 Printer Driver Settings (PC) To change Printer Driver Setting defaults, Click the Start button - Click Printers and Faxes. Right click on the Color Label Printer Icon and select Printing Preferences. To change Printer Driver Settings for a ...
What are the label and roll specifications for the LX800 or LX810?
LX800/810 Label Specifications Test all custom made label stock with the intended printer before ordering large quantities! Primera’s TuffCoat High Gloss and Semi-Gloss label materials have been specifically designed to be highly absorbent to allow ...
How many labels can I print with one LX800 cartridge?
How many labels can I print with one LX800 cartridge? The number of labels you can print depends on a few different factors: Size of image Driver quality setting Cartridge settings Since this information can change from label to label, it is ...
Labels are printing with poor quality, poor color matching or missing colors. (LX800-810 Only)
Labels are printing with poor quality, poor color matching or missing colors. (LX800-810 Only) This could be caused by a number of things, but usually is related to an ink nozzle not firing properly because it is clogged with dried ink. There are ...
Not able to set label size in Nice Label when creating a new label. The size does not change from 4.72" or 119.9mm.
Not able to set label size in Nice Label when creating a new label. The size does not change from 4.72" or 119.9mm. You may have another Primera printer installed on the same PC. If so, Nice Label defaults to that printer first. To fix this problem, ...
How much ink is in each LX800-LX810 cartridge?
How much ink is in each LX800/810 cartridge? Refer to this table: Part Number Description Capacity Ink Type 53335/76 Color Cartridge 24ml (8ml each Color) Dye based 53336/77 Black Cartridge 19ml Dye based 53020 Black Cartridge 24ml Pigment based ...
What is the difference between the 53377 dye-based black ink cartridge and the 53020 pigment-based black ink cartridge for the LX800/LX810 printers?
What is the difference between the 53377 dye-based black ink cartridge and the 53020 pigment-based black ink cartridge for the LX800/LX810 printers? There are TWO types of black ink cartridges available for the LX800/LX810 Color Label Printer: ...
Bar code scan quality is insufficient. Bar codes are not scanning consistently. Bar code is Blurry. (All Label Printers)
Color. Make sure you are printing bar codes in true black. This means both the image on the screen and the cartridge printing the bar codes should be black. Set the cartridge setting in the printer driver to Color + Black. If the bar code is true ...
Labels are fed through the printer 24 inches at a time resulting in a flashing pause LED light. (LX800/810)
Labels are fed through the printer 24 inches at a time resulting in a flashing pause LED light. (LX800/810) The LX800/810 is not properly sensing your label stock. Check the following settings: SENSOR TYPE SETTING. Make sure the sensor type setting ...
Can text, graphic and bar code objects be moved forward and backward using Nice Label? Is it possible to manipulate layers?
Can text, graphics and bar code objects be moved forward and backward using Nice Label? Is it possible to manipulate layers? This feature is not available in the Nice Label SE version that comes with the LX800. It is available in the upgraded ...
The LX800 is printing very slowly or it takes a very long time to start printing.
The LX800 is printing very slowly or it takes a very long time to start printing. Reboot. Make sure that you reboot after you install the printer driver and the Nice Label software. Modifications to the registry that were made during installation ...
Labels are not printing centered using my LX800/810.
Labels are not printing centered using my LX800/810. There are several things that can cause this: Page Size / Paper Size. If you are printing from an application other than Nice Label you may need to set the page size in the application and set the ...
How do I print a label from Adobe Illustrator to the LX800-810? (PC Only)
How do I print a label from Adobe Illustrator to the LX800-810. (PC Only) Click here for Macintosh Instructions. These instructions are for use specifically with Adobe Illustrator© CS. 1. Create a new document in Illustrator - Choose File - New ...
Will the LX800 print on preprinted label stock?
Will the LX800 print on preprinted label stock? Yes, it can if the following conditions are met: 1. To calibrate the label sensor you must separate the first label (or first 5 inches) from the label backing before you load the label stock into the ...
Which image file formats will Nice Label accept for importing?
Which image file formats will Nice Label accept for importing? The following image shows the available import formats: Article ID: 44799
How do I print a label from Adobe Illustrator to the LX800-810? (Mac Only)
How do I print a label from Adobe Illustrator to the LX800-810? (Mac Only) Click here for PC Instructions. These Instructions are for use specifically with Adobe Illustrator© CS. 1. Create your document using the File - New command. Set your Width ...
How do I change the print settings/preferences on my LX800 or LX810? What do they mean? (Mac Only)
LX800/LX810 Printer Driver Settings (Mac Only) To change the printer setting from any application click Print. The printer settings screen defaults to Copies and Pages. Click the drop down arrow to change the screen to Label Printer Settings. The ...
How do I print to the LX800-810 from MAC Preview? How do I print a standard graphic file to the LX800?
How do I print to the LX800-810 from MAC Preview? How do I print a standard graphic file to the LX800? You do not need a design program such as Adobe Illustrator or Photoshop to print to the LX800-810. If your label design is already in a format that ...
How do I print Barcodes to the LX800 using a MAC?
How do I print Barcodes to the LX800 using a MAC? You can integrate barcode printing into any application that can print to the LX800 by using Mac Barcode Maker. Mac Barcode Maker can be purchased from their website at www.barcodeformac.com This ...
The LX800 will not print the last few labels of my label stock.
The LX800 will not print the last few labels of my label stock. It is normal for the LX800 to not print the last several inches of labels. The out of stock sensor prevents the end of the label stock roll from being fed through the printer. If the ...
Is there a label counter for the LX800-810?
Is there a label counter for the LX800-810? Yes. This feature is available with the latest version of the LX800 printer driver - version 1.10 PC and 1.1 Macintosh and all versions of the LX810 driver. You may access this feature in the printer driver ...
The pause light is flashing when the LX800 starts.
The pause light is flashing when the LX800 starts. This indicates that the label stock is not installed. Label stock must be installed on the roll arm and fed into the printer.Article ID: 44883
The LX800 continuously resets (LEDs are flashing) when it is powered on.
The LX800 continuously resets (LEDs are flashing) when it is powered on. This may indicate a defective cartridge. Remove both cartridges and restart the printer. If the unit stops resetting after the initial 30 second start up, try new color and ...
The LX800 is printing over and over on the same spot. It is unwinding too much label stock inside the printer, causing the label stock to jam inside the printer.
The LX800 is printing over and over on the same spot. It is unwinding too much label stock inside the printer, causing the label stock to jam inside the printer. 1. Firmware. Make sure the printer has the latest firmware version installed. The latest ...
What is the difference between the LX800 and the LX810?
What is the difference between the LX800 and the LX810? Hardware: The LX810 has a new infrared loop sensor that can handle preprinted stock and more variations in label stock liner/backing. The LX810 has a PS/2 interface port for future products ...
Continuous rotating fast flashing lights appear when the unit is powered on. (LX800-810)
Continuous rotating fast flashing lights appear when the unit is powered on. (LX800-810) The sequence below is normal while the unit is starting up. This takes approximately 30 seconds. If you have the following flashing light sequence that ...
The print on the label is slowly drifting off the label and printing on the liner. The print position is not consistent from one label to the next. (LX800-810)
Article # 207359 - The print on the label is slowly drifting off the label and printing on the liner. The print position is not consistent from one label to the next. (LX800-810) Label drift is caused by stock that is not held properly in place by ...
The LX810 prints lightly or with banding at the end of each label.
LX810 prints lightly or with banding at the end of each label. If you are on version 1.11 or lower of the PC printer driver, updating to the latest driver version will fix this problem. http://www.primera.com/primera_printer_drivers.html Check your ...
Prints from NiceLabel but does not print from any other program. Job appears in queue and then immediately disappears. (LX400-LX810)
Prints from NiceLabel but does not print from any other program. Job appears in queue and then immediately disappears. (LX400-LX810) This only applies to Windows 7 computers. The current user does not have the necessary rights to ...
Magenta (Red) Ink is running or bleeding when printing with the Tuffcoat Extreme label stock. (LX400-LX810)
This article applies to the following stock: -Tuffcoat Extreme Clear Gloss Polyester -Tuffcoat Extreme White Gloss Polyester -TuffCoat Extreme White Matte Polypropylene (BOPP) To take advantage of the highly water-resistant features of this ...
Is the LX800 / LX810 / LX400 networkable? Can I use a USB to Ethernet Print Server? Can I print from a user (non-admin) account?
Is the LX800 / LX810 / LX400 networkable? Can I use a USB to Ethernet Print Server? Can I print from a user (non-admin) account? It is possible to share a printer as long as the host computer AND the client computer are Windows XP ...
What types / brands of label stock will the LX800/810/400 print to?
What types / brands of label stock will the LX800/810/400 print to? The LX800/810/400 requires Inkjet printable stock. We recommend our Tuffcoat label stock which is available in many different sizes at our web store - www.primerastore.com. ...
At what point do the LX800 / LX810 / LX400 printers warn for low ink? Can warning points be adjusted?
At what point do the LX800 / LX810 / LX400 printers warn for low ink? Can warning points be adjusted? The printer warns at the following points: 10% early warning - still printing well 0% faded, noticeable quality degradation -10% one color ...
How many labels per cartridge can I print? How can I calculate ink cost per label? (LX Printers)
How many labels per cartridge can I print? How can I calculate ink cost per label? Since labels sizes, colors etc. can vary greatly from label to label, the best way to estimate cost per label / labels per full cartridge is to run the Prints from ...
When printing from Corel Draw, printer settings/preferences that are set or changed within Corel Draw do not affect printed output of an LX-Series printer.
When printing from Corel Draw, printer settings/preferences that are set or changed within Corel Draw do not affect printed output of an LX-Series printer. This is correct. This is a limitation of the Primera driver, Corel Draw or both. You can ...
When printing from Corel Draw, printer settings/preferences that are set or changed within Corel Draw do not affect printed output of an LX-Series printer.
When printing from Corel Draw, printer settings/preferences that are set or changed within Corel Draw do not affect printed output of an LX-Series printer. This is correct. This is a limitation of the Primera driver, Corel Draw or both. You can ...
The LX800/810/400 pauses in the middle of a print job. The printer stops printing in the middle of a job with the pause light solid.
The LX800/810/400 pauses in the middle of a print job. The printer stops printing in the middle of a job with the pause light solid. This issue may be caused by: 1. Corrupt file. The print file is corrupted. Re-create the print file. Depending on ...
How do I find my software version?
How do I find my software version? In all of our software you can use the following procedure: 1. Open the software. 2. Go to the Help Menu. 3. Choose About. A version screen will appear. Refer to the images below to determine the location of the ...