When printing from Corel Draw, printer settings/preferences that are set or changed within Corel Draw do not affect printed output of an LX-Series printer.
When printing from Corel Draw, printer settings/preferences that are set or changed within Corel Draw do not affect printed output of an LX-Series printer.
This is correct. This is a limitation of the Primera driver, Corel Draw or both. You can work around the problem by following this procedure.
1. Before opening the Corel Draw file, change the printer preference defaults by going to Start - Printers and Faxes - Right Click the LX Printer - Choose Printing Preferences. Now adjust settings such as Quality etc. here. Click OK when finished.
2. Open the Corel Draw file. Corel Draw reads the default printer settings for the LX printer when it first opens the Corel file and then saves those settings with the label. While that file is open, settings cannot be changed through Corel or even through the method described in step 1. If you want to change the settings, close the Corel File, change the settings using the procedure in step 1 and then reopen the Corel file.
Article ID: 44976
Related Articles
When printing from Corel Draw, printer settings/preferences that are set or changed within Corel Draw do not affect printed output of an LX-Series printer.
When printing from Corel Draw, printer settings/preferences that are set or changed within Corel Draw do not affect printed output of an LX-Series printer. This is correct. This is a limitation of the Primera driver, Corel Draw or both. You can ...
Can I use the output cross cutter to cut the final height of my labels? (LX500, LX600, LX610, LX910, LX2000, LX3000)
Using the output cutter to cut the height of the label is not recommended. The output cutter was designed to cut a printed section of labels from the printer after it is complete. It typically cuts through liner only in the gaps between the labels. ...
LX Series Printer prints only one copy of a multiple copy job and then stops when printing from Corel Draw. (LX400-800-810-900)
LX Series Printer prints only one copy of a multiple copy job and then stops when printing from CorelDraw. (LX400-800-810-900) LX series printers require a document to be sent to the queue several times to print multiple copies. To print without ...
Discs are printing with poor quality or missing colors. (4100 Series)
Try the following solutions: 1. Change the Cartridge. Check your cartridge levels. If the lowest percentage color corresponds to a missing color in your print, replace that cartridge. Even if the software reports that the cartridge has 30% ink ...
I am unable to set the orientation correctly. Switching between portrait and landscape does not help. (LX Series)
Mac: If you are printing from Swift Publisher and you are unable to set the orientation, it probably means that you chose the wrong design type on the initial setup screen. Follow the tutorial found in this article. Make sure you choose Blank ...