The LX800/810/400 pauses in the middle of a print job. The printer stops printing in the middle of a job with the pause light solid.

The LX800/810/400 pauses in the middle of a print job. The printer stops printing in the middle of a job with the pause light solid.

This issue may be caused by:

1. Corrupt file. The print file is corrupted. Re-create the print file. Depending on the print program being used you can sometimes copy all objects from one file and paste them into a new file and then resave. However, it is also possible that one of the objects in the file is causing the corruption.

2. Imbedded Images. If you have imported incompatible images into NiceLabel, such as certain GIF images, you may have this problem. Try reformatting the imbedded image into a JPG or BMP and try again. Also, copying and pasting images from other programs into NiceLabel may cause similar problems.

3. Source Image Layer or Object Formatting. If you are printing from Corel, Illustrator, Photoshop, NiceLabel, Bartender or any program that allows you to print files that consist of multiple layers or objects, those objects or layers could cause the LX to skip labels if they are corrupted or the borders of the object lie outside the printable area of the label. Try removing, moving or reinserting these objects and printing again. Also, try flattening the file by exporting it as a bmp, jpg or tif. Open that new file in the same program or any program that supports that file type and print again.

4. Empty Label Stock. See this article

Article ID: 44993

Related Articles
Eddie stops, pauses or resets in the middle of printing the cookie causing it to smash cookies taller than 0.625" into the top wall of the printer during the start-up routine. (Eddie)
Sometimes Eddie will restart if it encounters an error. It often causes issues if this happens because you have a cookie on the tray. (or Cookie + Custom Tray) So when it starts up, it either displays an error OR it will smash the cookie into the top ...
How do I uncheck "Enable Advanced Printing Features" in the Printer Driver to fix USB communication issues?
If you encounter the following errors this procedure may resolve it. Partial printed labels or cookies or the printer stops printing in the middle of your image. Does not print. The print job disappears from the print queue immediately after ...
LX Series Printer prints a partial label and restarts/resets in the middle of a job. (LX910, LX3000)
Sometimes the printer will restart if it encounters an error or an interruption in the data flow from the computer over the USB cable. It can be hard to realize that the printer is restarting if you don't see it happen. Instead at the end of the job, ...
Print Queue- PT Status Monitor says Printing, but there's no activity on the printer. LX400, LX900, LX1000, LX2000 (Windows 10 1903 release)
Windows 10 release 1903 causes these issues. Try the following solutions: 1. Update to the latest version of Windows. Windows 10 release 2004 fixes this issue. Alternatively, you may upgrade your existing version of Windows 1903 or 1909 with a ...
LX Series Printer prints only one copy of a multiple copy job and then stops when printing from Corel Draw. (LX400-800-810-900)
LX Series Printer prints only one copy of a multiple copy job and then stops when printing from CorelDraw. (LX400-800-810-900) LX series printers require a document to be sent to the queue several times to print multiple copies. To print without ...

The LX800/810/400 pauses in the middle of a print job. The printer stops printing in the middle of a job with the pause light solid.

The LX800/810/400 pauses in the middle of a print job. The printer stops printing in the middle of a job with the pause light solid.

Related Articles

Eddie stops, pauses or resets in the middle of printing the cookie causing it to smash cookies taller than 0.625" into the top wall of the printer during the start-up routine. (Eddie)

How do I uncheck "Enable Advanced Printing Features" in the Printer Driver to fix USB communication issues?

LX Series Printer prints a partial label and restarts/resets in the middle of a job. (LX910, LX3000)

Print Queue- PT Status Monitor says Printing, but there's no activity on the printer. LX400, LX900, LX1000, LX2000 (Windows 10 1903 release)

LX Series Printer prints only one copy of a multiple copy job and then stops when printing from Corel Draw. (LX400-800-810-900)