Other
What is CD Text? What are ISRC codes?
What is CD Text? What are ISRC codes? A disc containing CD Text will display the names of the track and artist on CD Text enabled devices. Some players are not capable of displaying CD Text. 1. PTPublisher - It is not possible to add CD text to an ...
Discribe locks up or crashes when opening.
Discribe locks up / crashes when opening. A. Printer Driver This can be caused by a corrupted Bravo / Bravo II / BravoPro printer driver. Try opening Discribe with the USB cable to the Bravo disconnected. If Discribe opens normally, you will need to ...
Unable to extract tracks from an audio CD using Discribe.
Unable to extract tracks from an audio CD using Discribe. Update to the latest version of the MAC OS. There are known compatibility issues with Macintosh OS version 10.4.6.Article ID: 45087
The drive in the Bravo does not show up as a recorder in Discribe. (Bravo - MAC)
The drive in the Bravo does not show up as a recorder in Discribe. (Bravo - MAC) Try the following suggestions to get the drive recognized. 1. Plugin Sequence. Try this sequence for getting the Mac to recognize the unit's burner drive: Shutdown your ...
How do I extract tracks from an Audio CD? (PrimoDVD or Discribe)
How do I extract tracks from an Audio CD? (PrimoDVD or Discribe) While it is possible to extract tracks using PrimoDVD or Discribe, there are many free third party software applications that can do this more efficiently and with many more features. ...
How fast can the DUP-07 copy a CD or DVD?
How fast can the DUP-07 copy a CD or DVD? There are two methods you can use to copy from the duplicator, disc to disc or from the hard disk (HDD). There are varying ways to use both functions for convenience factors (such as autocopy, load and copy, ...
Targets mcode mixed! - Error is displayed on the LCD screen.
Targets mcode mixed! - Error is displayed on the LCD screen. This means that you have inserted mixed media brands into one or more recorders. All seven recorders must contain the same exact discs. Press the exit button <-- to clear the error. All ...
Targets mcode mixed! - Error is displayed on the LCD screen.
Targets mcode mixed! - Error is displayed on the LCD screen. This means that you have inserted mixed media brands into one or more recorders. All seven recorders must contain the same exact discs. Press the exit button <-- to clear the error. All ...
My discs are constantly rejected or burned discs are bad. (DUP-07 Only)
My discs are constantly rejected. Burned discs are bad. (DUP-07 Only) Note: When you receive a rejected disc the drive door containing the bad copy will stay closed. Only drives with good copies will open for reloading. You may reload the drive with ...
After recording a disc, one or more of the drive doors on the DUP-07 does not open. What does this mean?
After recording a disc, one or more of the drive doors on the DUP-07 does not open. What does this mean? The discs in the closed doors are bad. When you receive a bad copy the drive door containing the bad copy will stay closed. Only drives with good ...
The DUP-07 restarts over and over again when switched on.
The DUP-07 restarts over and over again when switched on. The power supply is accidentally set to 220v instead of 110v. Switch the setting back to 110v. The setting is located on the power supply on the back of the unit.Article ID: 44859
What type of masters can the DUP-07 record from? What type of blanks can the DUP-07 record to?
What type of masters can the DUP-07 record from? What type of blanks can the DUP-07 record to? See the table below: Master Blanks DVD–R/RW to DVD–R/RW DVD+R/RW to DVD+R/RW DVD–R/RW to DVD+R/RW DVD+R/RW to DVD-R/RW DL DVD+R to DL DVD+R DL DVD-R to ...
The Inscripta is printing light or with poor quality. How can I increase print quality?
The Inscripta is printing light or with poor quality. How can I increase print quality? Try the following suggestions: Intensity. Try increasing the intensity. Go to Start - Control Panel - Printers - Right Click on the Optical Disc Printer - ...
How do I print half CDs/DVDs on my Inscripta to double the life of my ribbon?
How do I print half CDs/DVDs on my Inscripta to double the life of my ribbon? You can print half CDs (text or graphics only on the top portion) to save ribbon by reducing the ribbon advance to make more efficient use of the ribbon, thereby ...
My Inscripta will not Print or I receive a flickering status light.
My Inscripta will not Print or I receive a flickering status light. Here are some suggestions to get the Inscripta thermal printer to print. 1. Port Mode. Make sure that the PC's parallel port mode is set to ECP or AT if it is a Dell. This is done ...
When I press the Ribbon Cartridge Eject button on my Inscripta, nothing happens. The ribbon cartridge is not ejected.
When I press the Ribbon Cartridge Eject button on my Inscripta, nothing happens. The ribbon cartridge is not ejected. The ribbon cartridge eject button, is a mechanical button so it requires some force to eject the cartridge. Below is the best ...
There is a vertical line(s) in the images that are printed with the Inscripta.
There is a vertical line(s) in the images that are printed with the Inscripta. Most likely there is a spec of dust/dirt on the print head. Try cleaning the print head with alcohol and a soft cloth. To clean the print head: Eject the print head ...
Printed image looks stretched or skewed when the ribbon has 1/3 or less remaining. The printer sounds like it is stuttering. (Inscripta Only)
Printed image looks stretched or skewed when the ribbon has 1/3 or less remaining. The printer sounds like it is stuttering. (Inscripta Only) Solution: Adjust the take-up tension using the Inscripta Utility below. This will only fix the problem ...
The XRn does not start up or there is a "No Status" message on the LCD screen.
The XRn does not start up or there is a "No Status" message on the LCD screen. 1. Hard Reboot. Switch off the XRn using the power switch on the back of the unit. Use the momentary switch above the power supply and hold it for five seconds ...
Error in PTPublisher client "Unable to communicate with the robot" while attempting to find the Bravo XRn on the network.
Error in PTPublisher client "Unable to communicate with the robot" while attempting to find the Bravo XRn on the network. The PTPublisher client uses standard Windows Networking protocol to find the XRn. There can be no password authentication ...
Can I change the name of the embedded computer in the XRn as it appears on my network?
Can I change the name of the embedded computer in the XRn as it appears on my network? No. If you must change it. You must include the prefix "XRN" to any name you choose. The PTPublisher client software searches the network for computer names ...
My Composer Max is not picking discs or is dropping discs. (Calibration Instructions)
My Composer Max is not picking discs or is dropping discs. (Calibration Instructions) Use the instructions below and the three buttons on the front of the ComposerMax to calibrate the picking position of the arm. Note: For best results connect the ...
How do I adjust the drives on my Composer Max for front-to-back drive picking problems?
How do I adjust the drives on my Composer Max for front-to-back drive picking problems? The drives in the Composer Max come factory calibrated to the correct front to back positions. Typically you would not need to manually adjust drive positions. ...
Unable to Communicate with the Robot -or- No Response Make sure the 9 pin serial cable is connected -or- More than one Disc Publisher was detected -or- Serial / COM port communications errors when opening PrimoDVD? (Composer XL/Pro)
Unable to Communicate with the Robot -or- No Response Make sure the 9 pin serial cable is connected -or- More than one Disc Publisher was detected -or- Serial / COM port communications errors when opening PrimoDVD? (Composer XL/Pro) Try these ...
The Composer CD/DVD drive(s) do not appear in My Computer. I receive a No external drives found error in Primo DVD. (Composers Pro/XL/Max)
The Composer CD/DVD drive(s) do not appear in My Computer. I receive a No external drives found error in Primo DVD. (Composers Pro/XL/Max) Below are a few suggestions for getting your PC to recognize the drives in the unit. 1. Plugin Sequence. Try ...
My Composer XL/Pro is not picking discs correctly. (Calibration Instructions)
My Composer XL/Pro is not picking discs correctly. (Calibration Instructions) Your Composer probably needs calibration. It is possible to calibrate the Composer arm by pressing the buttons on the front in a particular sequence. Calibrating the Input ...
The printer tray does not eject when the Composer arm tries to load a disc.
Make sure the 6 pin din round auxiliary cable is connected from the back of the printer to the back of the Composer.Article ID: 44665
The Composer or Conductor makes a grinding noise when it is turned on or when the arm starts moving down.
The Composer or Conductor makes a grinding noise when it is turned on or when the arm starts moving down. Solution: Make sure the correct power supply is plugged in. If the 30v power supply for a Signature printer is plugged into the Composer it ...
How do I print only using my Composer XL/Pro duplicator to load CD/DVDs into my printer?
How do I print only using my Composer XL/Pro duplicator to load CD/DVDs into my printer? You can print only to a printer hooked up to Composer XL/Pro from any graphics program provided that the image is properly formatted for the printer. Because of ...
How do I print only using my Composer MAX duplicator to load CD/DVDs into my printer?
How do I print only using my Composer MAX duplicator to load CD/DVDs into my printer? You can print only using the RoboPrint software that came with your Composer Max. Look for it on the installation CD. If you did not receive RoboPrint with your ...
How do I rack mount my XR series duplicator? What rack should I use?
How do I rack mount my XR series duplicator? What rack should I use? Any Standard 19" Wide Rack will work. The XR series duplicators only require a half rack instead of full rack but both will work. Half rack refers to the depth of the rack. If you ...
My 8x/16x DVD drive burns my data on 8x/12x/16x media in the same amount of time as my 4x media?
My 8x/16x DVD drive burns my data on 8x/12x/16x media in the same amount of time as my 4x media? 1. Port Speed. First of all, make sure you have your publisher connected to a USB 2.0 port. See this article for details. 2. Drive Speed. Make sure your ...
Why can't I record a 2-hour video to DVD?
Why can't I record a 2-hour video to DVD? The most common reason that your video will not burn to a DVD is because it is too long. When videos are originally created there are many possible bit rates that may be selected by the author. These bit ...
When both the Bravo XR and Bravo II drivers are installed the Bravo XR will not print through Discribe. (Mac Only)
When both the Bravo XR and Bravo II drivers are installed the Bravo XR will not print through Discribe. (Mac Only) Both of these printer drivers cannot be installed at the same time if you are printing and burning through Discribe. You must remove ...
How do I completey remove Discribe Robot for MAC OSX from my computer?
How do I completey remove Discribe Robot for MAC OSX from my computer? Delete the Discribe file from the applications directory. Delete the Discribe.pkg from the receipts folder. Delete the Discribe preferences file from the library/preferences ...
How do I create an image of a master disc in Discribe?
How do I create an image of a master disc in Discribe? 1. Place the master disc in the drive in your Mac. 2. Launch Discribe and select the CD/DVD copy option. 3. Select the drive in your Mac as the source drive. 4. Select the Utilities menu on the ...
How do I copy a DVD using Discribe? - Three methods.
How do I copy a DVD using Discribe? - Three methods. There are three ways to copy a DVD using Discribe. Note: You cannot author or create a DVD using Discribe. You need a separate authoring program to convert the MPEG, AVI or other video files into ...
How do I create a MAC/PC Hybrid Disc using Discribe?
How do I create a MAC/PC Hybrid Disc using Discribe? Phase I - Creating the Image for the MAC portion of the Hybrid Disc. To create a Mac/PC Hybrid disc you first have to create an Image File. To create an Image file click on your Finder. Go to ...
Discs will not print after they finish burning when using Discribe to do a burn and print job. (Mac)
Discs will not print after they finish burning when using Discribe to do a burn and print job. (Mac) 1. Printer Driver. Make sure the printer driver is installed. Check the Printer Setup Utility or Print Center. (Hard Drive - Applications - ...
This drive is currently in use or contains mounted volumes. Please unmount these volumes and press OK. - Discribe message received when attempting to select source drive.
This drive is currently in use or contains mounted volumes. Please unmount these volumes and press OK. - Discribe message received when attempting to select source drive. If you receive this message it means that the MAC OS has control of the disc in ...
Next page