Can I change the name of the embedded computer in the XRn as it appears on my network?

• Related Articles

• Colors are printing wrong. Colors are not accurate. Colors are not matching. (Eddie)

  There are several possible reasons for colors to print incorrectly. The first step is to print a clean print on your cookie or a cardboard coaster. 1. Print a Clean Print. 2. Print your design or the Clean Print on a Cardboard Coaster or Piece of ...

• Error in PTPublisher client "Unable to communicate with the robot" while attempting to find the Bravo XRn on the network.

    Error in PTPublisher client "Unable to communicate with the robot" while attempting to find the Bravo XRn on the network.   The PTPublisher client uses standard Windows Networking protocol to find the XRn.  There can be no password authentication ...

• The XRn does not start up or there is a "No Status" message on the LCD screen.

    The XRn does not start up or there is a "No Status" message on the LCD screen.    1. Hard Reboot.  Switch off the XRn using the power switch on the back of the unit.  Use the momentary switch above the power supply and hold it for five seconds ...

• PTPublisher NE Client (Network Software) can't find the Server computer or the Bravo connected to it. (PTPublisher NE)

  PTPublisher NE Client (Network Software) can't find the Server computer or the Bravo connected to it. Note: PTPublisher NE is not compatible with the Bravo SE. Check the following items: On the Server (Computer Connected to the Bravo) 1. Make sure ...

• The error message “The specified print monitor is unknown” appears when attempting to install a shared Primera printer over the network on a Windows Vista computer.

    The error message “The specified print monitor is unknown” appears when attempting to install a shared Primera printer over the network on a Windows Vista computer. This error message is caused when UAC is disabled on the Vista computer.  To ...