Targets mcode mixed! - Error is displayed on the LCD screen.

• Related Articles

• Targets mcode mixed! - Error is displayed on the LCD screen.

  Targets mcode mixed! - Error is displayed on the LCD screen. This means that you have inserted mixed media brands into one or more recorders.  All seven recorders must contain the same exact discs. Press the exit button <-- to clear the error.  All ...

• Internal Software Error is displayed - Job is stopped. (PTPublisher)

    After each disc is burned, Windows attempts to play the contents of the CD or DVD. (PTPublisher) After a disc is burned the drive will not open for the robot arm to pick it. Receive Error - The disc was not picked, press the left button to try ...

• RIP 900 Service Software Error - Offending Range Check Command. Error displayed on CX1200 control panel. (CX1200)

  RIP 900 Service Software Error - Offending Range Check Command. Error displayed on CX1200 control panel. (CX1200) This indicates that the print resolution setting in the driver is set to something other than the defaults.    To change settings follow ...

• Unable to print or change settings from Mac Preview or other applications. On the print screen, instead of Printer Settings, "PrinterName"PDE is displayed crossed out.

    Unable to print or change settings from Mac Preview or other applications. On the print screen, instead of Printer Settings, "PrinterName"PDE is displayed crossed out. There are two possible reasons for this problem: 1. Using the latest Intel ...

• The XRn does not start up or there is a "No Status" message on the LCD screen.

    The XRn does not start up or there is a "No Status" message on the LCD screen.    1. Hard Reboot.  Switch off the XRn using the power switch on the back of the unit.  Use the momentary switch above the power supply and hold it for five seconds ...