LX610
Cuts do not line up with the prints or alignment is off. Cuts are crooked (LX610).
Cut alignment is calibrated at the factory. However, it is possible that you may need to adjust the cut line position for certain prints/cuts. 1. Alignment Test Print. You can adjust overall alignment if cuts are consistently misaligned where the cut ...
Print Alignment Not Available for Digital Die-Cut message appears on the alignment screen in PrintHub. (LX610 Only)
Print alignment is not available on the LX610 by design because there are no die-cut labels that can be aligned to a print. Instead, the cut line must be aligned to wherever the printing occurs. Cut alignment is calibrated at the factory. However, ...
My LX610 prints the design but does not cut it.
1. Make sure your knife is installed correctly, and the blue holder is pushed all the way back so the knife can easily move up and down. Follow this video. When properly installed, the knife should move up and down as shown in this video: 2. Restart ...
How do I cut the Magnetic Material for my LX610.
The recommended starting knife pressure for the magnetic media is 22. This media is not meant to be cut all the way through because there is no liner. Instead, this knife pressure setting is meant to score the magnetic media so that it can be removed ...
What type of labels / media can I use in my LX610 to cut my own shapes?
Two types of media can be used. 1. Digital Die-Cut Labels. If you are using the printer to digitally die-cut your own shapes and sizes only Primera label stock can be used. This media comes from Primera with a smart chip that identifies the media, ...
My LX610 or LX600 is skipping, slipping, printing over on the same spot or printing out of alignment left to right. Feed Stall. (LX610-LX600)
There are several reasons for skipping labels or a feed stall error on the LX-Series printers. A full article explaining all of the possibilities can be found here. See below for the LX600/LX610 specific reasons. Create Loop. Check the create loop ...
When importing a PDF, AI, EPS or SVG file to PTCreate Pro the program crashes. (LX610)
This crash is caused by fonts in the file that are not found on the PC. Solution: Convert fonts to vector graphics by outlining them. (In Illustrator, select the text - go to the Type Menu - Choose Create Outlines.) Article ID: 021220
LX610 Video: Three ways to print and cut using PTCreate Standard and PTCreate Pro
Tip: Click "CC" to enable closed captioning. This will allow you to see the text that goes with the video. It will automatically be translated into the default language set on YouTube. Click the gear icon to change the language of the subtitles.
LX610 Initial Setup Video
Tip: Click "CC" to enable closed captioning. This will allow you to see the text that goes with the video. It will automatically be translated into the default language set on YouTube. Click the gear icon to change the language of the subtitles.
What are the designer file specifications for the LX610.
PTCreate Pro allows users to import vector files created in a design program such as Illustrator which contains both the cut line and the print file.
The LX610 goes through the motions of cutting out my label but nothing is cut.
1. Make sure you have the cutting knife installed. 2. Make sure the cutting knife holder is inserted all the way into the knife collar. 3. Make sure the blue collar release lever is pushed in. 4. The digital die-cutting blade may need replacement. ...