Other
How do I create a Data Disc in Discribe?
How do I create a Data Disc in Discribe? Data discs can be used for file transferring, file back ups, software installation or even playing mp3 music or viewing mpg or other video and audio formats viewable on a Mac or PC. There are several different ...
Using Discus 3.x or greater I am unable to print to the Bravo correctly. The Bravo prints the design in the corner of the disc or loads the disc in the tray and doesn't print at all.
Using Discus 3.x or greater I am unable to print to the Bravo correctly. The Bravo prints the design in the corner of the disc or loads the disc in the tray and doesn't print at all. 1. Since the Discus 3.x software is designed for many CD printers ...
Can I copy commercial DVD movies?
Can I copy commercial DVD movies? No. Our duplicators are intended only for duplication of original content audio, video and other digital information. All applicable copyright laws must be observed. Most DVD movies are copy-protected with encryption ...
How do I remove the tray on a Plextor 716a DVD drive to check for jammed discs?
How do I remove the tray on a Plextor 716a DVD drive to check for jammed discs? To remove the tray, it is necessary to disengage a small plastic hook on the left side of the tray. You need to pull up slightly on this hook so that it clears the catch ...
How do I copy/create DVDs in Primo DVD?
How do I copy/create DVDs in Primo DVD? The Primo DVD software was not meant for authoring DVDs. You must use another software to burn a master DVD first. Make sure that disc plays and the menus work on all systems. Now do one of the following three ...
When printing JPG, BMP or other image files other than STD files, the SDK software prints the last image file for all jobs submitted.
When printing JPG, BMP or other image files other than STD files, the SDK software prints the last image file for all jobs submitted. This problem is caused by having a common folder for print image files. You must have a separate folder for each ...
The drive in the Bravo does not show up as a recorder in Discribe. (BravoPro or II - Mac)
The drive in the Bravo does not show up as a recorder in Discribe. (BravoPro or II - Mac) Try the following suggestions to get the drive recognized. 1. Plugin Sequence. Try this sequence for getting the Mac to recognize the unit's burner drive: ...
How do I queue several jobs to run consecutively using Discribe?
How do I queue several jobs to run consecutively using Discribe? Discribe features the ability to queue several jobs for production. Queuing is done as follows: 1. Launch Discribe. 2. Select the appropriate job type and create your job according to ...
How do I queue several jobs to run consecutively using Discribe?
How do I queue several jobs to run consecutively using Discribe? Discribe features the ability to queue several jobs for production. Queuing is done as follows: 1. Launch Discribe. 2. Select the appropriate job type and create your job according to ...
How do I setup access rights/privileges/permissions to specific folders on my Macintosh?
How do I setup access rights/privileges/permissions to specific folders on my Macintosh? Typically, Primera software requires rights to the following folders: Hard Drive - Applications Hard Drive - Library - Printers Hard Drive - Library - Receipts ...
How can I activate the Discribe software? Do I need an activation code?
How can I activate the Discribe software? Do I need an activation code? This software requires activation. Activation is free. Simply click the "Activate" button that appears when you open the software. Click on the link to register the software. ...
Black and white images are printing with poor quality. Black areas are printing gray or with color cartridge instead of black. (Bravo II or XR, BravoPro, LX800)
Black and white images are printing with poor quality. Black areas are printing gray or with color cartridge instead of black. (Bravo II or XR, BravoPro, LX800) The best print setting for nearly all situations is displayed below. Even black and white ...
Black is not printing with the Black Cartridge. Black is printing with the Color Cartridge. (Bravo II or XR, BravoPro, LX800)
Black is not printing with the Black Cartridge. Black is printing with the Color Cartridge. (Bravo II or XR, BravoPro, LX800) Bravo II Make sure you have the Ink Cartridge set to Color + Black, Color Matching set to PrimaColor, Print Black using only ...
PX Engine Error -6 Invalid use of Null -or- Runtime Error 94 -or- Job Error 22 (PrimoDVD)
PX Engine Error -6 Invalid use of Null -or- Runtime Error 94 -or- Job Error 22 (PrimoDVD) Upgrade to Primo DVD 2.1.008 or greater. You must reboot after upgrading. This will upgrade your burn engine (px engine) to version 3.06.36.500. A burn ...
The PTBurn Client is not seeing the Server -or- The Server can't see the Client.
The PTBurn Client is not seeing the Server -or- The Server can't see the Client. Client finding Server. In order for the Client to "see" the Server you must be able to browse to the Server computer through My Network Places, open the PTBurnJobs ...
Is the BravoII / BravoXR / BravoPro / BravoXRP and BravoProXi series networkable?
Is the BravoII / BravoXR / BravoPro / BravoXRP and BravoProXi series networkable? Yes. The PTPublisher Network Edition software is required. It is available through your local reseller, our online store at www.primerastore.com or through our ...
Tutorial: Using Primera Templates with Photoshop for Macintosh
Tutorial: Using Primera Templates with Photoshop for Macintosh Click here to view the tutorial. Tutorials are in Flash format. If when you open a tutorial, it does not start to play after it has been downloaded, you may need to download and install ...
Can I use Bravo/Bravo II with my EasyCD Creator® Software (or some other CD/DVD burning software)?
Can I use Bravo/Bravo II with my EasyCD Creator® Software (or some other CD/DVD burning software)? No. The software that comes with your Bravo not only burns the discs, but also controls the printer and the robotics. If you were to try using some ...
My Bravo/Bravo II is only printing half or part of a CD or DVD.
My Bravo/Bravo II is only printing half or part of a CD or DVD. The solution to your problem depends on what type of error you are getting. Does the Bravo have a flashing cartridge light on the top? If it does, then there is a tray stall of some ...
I receive a slow flashing Ink Cartridge (Left) Light after the first disc is printed. The Bravo never puts the printed disc in the output bin.
I receive a slow flashing Ink Cartridge (Left) Light after the first disc is printed. The Bravo never puts the printed disc in the output bin. This problem can be caused by several things. 1. SureThing label setup. You may have a problem with how you ...
My cartridges are empty but the software says I have some ink left?
The ink levels reflected in Print Hub or the Config Utility are an estimate of the ink level in the unit. The levels are not actually read from the cartridges themselves. This estimate is based on an average of all three colors. Usually, the ...
Can I operate my Bravo with its cover open?
Can I operate my Bravo with its cover open? No. The cover must be closed for the robotics to move. This is a required safety feature. However, there is a way to open the lid and watch the Bravo if you need to observe the robotic movements for ...
How many discs per cartridge can the Bravo/Bravo II print?
How many discs per cartridge can the Bravo/Bravo II print? This depends on many factors. However, with 100% coverage and printing an even amount of each color at the default resolution of 1200 the Bravo/Bravo II prints approximately 100 to 130 ...
What is Kiosk Mode and how do I use it?
What is Kiosk Mode and how do I use it? Kiosk mode, unique to Bravo, allows you to double the capacity of the unit. Instead of loading just the right bin with up to 25 blank discs for Bravo or 50 blank discs for BravoPro, you can load both left AND ...
The image is printing off center on my disc every few prints. It will print several centered and then one off center and then go back to centered again. (Bravo)
The image is printing off center on my disc every few prints. It will print several centered and then one off center and then go back to centered again. (Bravo) This can happen because of a dirty encoder belt on the Bravo. The encoder belt runs the ...
The Bravo / Bravo II will not stay powered on. When it is plugged in it performs initialization and then powers off.
The Bravo / Bravo II will not stay powered on. When it is plugged in it performs initialization and then powers off. This can sometimes be caused by a faulty print cartridge. Try the following procedure: 1. Remove both cartridges. Since the unit does ...
I have lost my installation CD. How do I get a new one?
I have lost my installation CD. How do I get a new one? Everything you need can be downloaded from our website. Check the Support section of our website and find the Printer Drivers page. Then, you'll be able to download the driver for the Disc ...
No Response. Make sure the Disc Publisher is powered on and the USB cable is connected.
No Response. Make sure the Disc Publisher is powered on and the USB cable is connected. There are several things to check. 1. Local Admin Rights. You must be have local administrative rights to the PC running the Bravo. You may be able to print ...
The arm for my Bravo / Bravo II / Bravo Pro is stuck in the up or down position. It makes a buzzing noise when I power on the unit. (inhouse)
The arm for my Bravo / Bravo II / Bravo Pro is stuck in the up or down position. It makes a buzzing noise when I power on the unit. Bravo II This can happen if the Bravo II power is interrupted during an arm movement. Use the following procedure to ...
How do I get new ink cartridges? Will other ink cartridges work?
How do I get new ink cartridges? Will other ink cartridges work? Ink cartridges are sold throughout the world by our resellers, distributors and hundreds of WWW sites. Our online store at www.primerastore.com is also a handy place for customers in ...
There is a CD/DVD in my printer tray. How do I open the printer Tray?
With the cover closed, press the ink cartridge button (left button).Article ID: 44588
Does the Bravo/Bravo II/BravoPro support business card CDs and if so what sizes are supported?
Does the Bravo/Bravo II/BravoPro support business card CDs and if so what sizes are supported? Yes! An optional Business Card Adapter Kit is required. It comes with templates and input bins for the following sizes of cards: 80mm mini-disc CDs (201 ...
I receive Internal Printer Communications errors or stalls indicated by the flashing Ink Cartridge (left) button.
I receive Internal Printer Communications errors or stalls indicated by the flashing Ink Cartridge (left) button. For "Internal Printer Communications" errors or stalls, try the following maintenance procedures: 1. Guide Shaft. Power the Bravo off ...
The duplicator cover is open. Shut the top cover to continue Received this error but the cover IS closed.
"The duplicator cover is open. Shut the top cover to continue" Received this error but the cover IS closed. The reflective sticker on the tinted cover may have come off or is out of place. If you open the lid and look where it hinges to the Bravo ...
Discs are not sliding down the chute. (Inhouse)
Discs are not sliding down the chute. There are several things to try for this problem. 1. Make sure that you have the Teflon tape strips supplied with the Kiosk Mode Kit taped over the ridges on the chute and not in between them. 2. Make sure the ...
Discs are not sliding down the chute? (Inhouse)
Discs are not sliding down the chute? There are several things to try for this problem. 1. Make sure that you have the Teflon tape strips supplied with the Kiosk Mode Kit taped over the ridges on the chute and not in between them. 2. Make sure the ...
Pioneer's website for the 103/104/105/106/107/108 DVD+/-R recorders has a more recent version of the firmware. Should I install it?
Pioneer's website for the 103/104/105/106/107/108 DVD+/-R recorders has a more recent version of the firmware. Should I install it? No! Do NOT install Pioneer's version of the firmware. We have a special version from Pioneer that must be installed ...
Which USB 2.0 and Firewire Cards does Primera recommend to connect to the Bravo, Bravo II or BravoPro?
Which USB 2.0 and Firewire Cards does Primera recommend to connect to the Bravo, Bravo II or BravoPro? We recommend the cards that we sell through our sales number - 1-800-797-2772. However, the most important part of a card is not the brand but ...
DVDs burn correctly (no errors reported) but do not play -or- DVDs play on one player but not on another.
DVDs burn correctly (no errors reported) but do not play -or- DVDs play on one player but not on another. This is a fairly common problem that affects all DVD burners and players. The following factors affect whether a DVD will be playable (listed in ...
Is there a limit to the number of jobs that can be queued using Discribe (Mac) or PrimoDVD (PC)?
Is there a limit to the number of jobs that can be queued using Discribe (Mac) or PrimoDVD (PC)? Discribe can queue an unlimited number of jobs. PrimoDVD can queue up to 32 jobs. Article ID: 44809
Next page