How many discs per cartridge can the Bravo/Bravo II print?

• Related Articles

• How many labels per cartridge can I print? How can I calculate ink cost per label in Print Hub? (LX Series Printers)

  The cost estimator is found under the queue section on the first tab of the Print Hub on PC and on the first tab of the Config Utility on Mac. On PC the last five job costs are stored in the list. Each job will show the cost per label based on the ...

• How many labels per cartridge can I print? How can I calculate ink cost per label? (LX400, LX800 or LX810)

  How many labels per cartridge can I print? How can I calculate ink cost per label? Since labels sizes, colors etc. can vary greatly from label to label, the best way to estimate cost per label / labels per full cartridge is to run the Prints from ...

• Poor Quality Printing, Banding, Streaks, Missing Colors. My cartridge is defective. What can I do? (LX810, LX910, LX400, LX500, LX600, LX610, IP60, Bravo series, Eddie)

  If the cartridge has not been used for some time, the inkjet nozzles may dry out. 1. Clean / Test Print Print the Clean/Test Print described in this article. Send us a picture of the clean/test print! 2. Clean the Cartridge Manually Remove the ...

• My image is not printing centered on my discs (Bravo Disc Publisher Series - PTPublisher)

  This may be due to: 1. Ink on the Print Tray. Clean any excess ink that has accumulated on the printer tray with rubbing alcohol and a paper towel. Ink can cause the disc to stick on the tray and NOT slide into the correct position for printing. This ...

• My Bravo (SE, SE-3, II, XR, XRP, Pro, Xi-Series, 4100, 4200 Series) is not picking discs or is dropping discs?

  Where and How is it failing? First, determine exactly where and how the robot is failing to pick. To do this, operate the unit with the cover open. You will need to trick the lid sensor into believing the unit's cover is still closed. Follow this ...