LX400-LX500
How do I use the 053376S cartridges for my LX400?
Visit this page to download the firmware required for this ink or follow the instructions below. https://www.primera.com/053376SLX400 LX400 Firmware Upgrade for 053376S IMPORTANT: This 053376S ink cartridge for LX400 can only be used with units ...
The Power and Ink lights are flashing simultaneously. The printer does not print. (LX400)
The Power and Ink lights are flashing simultaneously. The printer does not print. (LX400) The pause button is pressed. Press the pause button again to unpause the printer.Article ID: 44598
Labels are walking back and forth during printing. Left Margin Offset is inconsistent. Printing is offset from left to right. (LX500)
1. Guides. To help guide narrow labels you may add guides to the printer. Primera sells guides for this purpose. Purchase both items listed below. Fixed left side label Guide for LX500 Moveable Self Adhesive Guide for LX500 Installation ...
LX400 Cutter Specifications for Part 74263
LX400 Cutter Specifications for Part 74263 Paper Weight: Up to 200 g/m2 Pulse Length: 150 - 350 ms Total Cutting Cycle: 550 ms Service Life: 1,000,000 cuts at paper weights up to 200 g/m2 MTBF: 2,000,000 cyclesArticle ID: 44970
What are the Label and Roll Specifications for the LX400 and PX450?
LX400 & PX450 Label Specifications Test all custom made label stock with the intended printer before ordering large quantities! Primera’s TuffCoat High Gloss and Semi-Gloss label materials have been specifically designed to be highly absorbent to ...
Label presents or advances forward and then retracts between each print in a job. (LX400)
Label presents or advances forward and then retracts between each print in a job. (LX400) This can happen between prints if the file is very large or the computer is slow. The driver has a preset delay time that it waits for another label before it ...
Labels are printing with poor quality or poor color matching, streaks, banding, or missing colors. (LX400)
Cartridge A defective, empty or clogged cartridge will cause all of the problems listed above. 1. Try a new cartridge. Make sure that the ink cartridge has ink remaining. We often get cartridges returned as "bad" when in reality they've just run ...
Labels are fed through the printer 24 inches at a time resulting in a flashing power LED light.
Labels are fed through the printer 24 inches at a time resulting in a flashing power LED light. The LX400 is not properly sensing your label stock. Check the following settings: SENSOR TYPE SETTING. Make sure the sensor type setting in the printer ...
How do I change the print settings/preferences on my LX400? What do they mean? (PC Only)
LX400 Printer Driver Settings (PC) To change Printer Driver Setting defaults, Click the Start button - Click Printers and Faxes. Right click on the Color Label Printer Icon and select Printing Preferences. To change Printer Driver Settings for a ...
My LX400 is not printing or it prints one label and stops. Receive “Document failed to print” message, "printer setup problem" or "unrecoverable error".
Please try the following solutions: Run an Alignment Print. (PC) Go to Devices and Printers – Right Click on the Color Label 400 – Choose “Printing Preferences” – Click on Cartridge Alignment. (Mac) Click on the Align Cartridge button in the ...