LX400 Cutter Specifications for Part 74263

• Related Articles

• Cutter Stall Error (LX600-LX610)

  The cutter referred to by this error message is the output cutter located at the front of the printer. This is a pizza wheel-style cutting disc that completely cuts through the label/media at the end of the job or at the end of every page, depending ...

• Can I use the output cross cutter to cut the final height of my labels? (LX500, LX600, LX610, LX910, LX2000, LX3000)

  Using the output cutter to cut the height of the label is not recommended. The output cutter was designed to cut a printed section of labels from the printer after it is complete.  It typically cuts through liner only in the gaps between the labels.  ...

• How do I use the Cleaning Card to clean my output cross-cut media cutter. (LX600, LX610, LX910, LX3000, LX500)

  If you are prompted to clean your output cutter using a cleaning card, use these instructions: ​ https://youtu.be/0ibFKY52kho Note: This cleaning procedure works best when done regularly.  If your cutter gets too full of adhesive and other debris, it ...

• Primera's new Smart Part format for Custom Label Stock Explained

  You can now see important information about your label stock embedded within the part number printed on a label inside the core.  Read below for instructions on how to decipher this smart part number. SMART PART: The format is: PRI (for Primera) – ...

• What are the designer file specifications for the LX610.

  PTCreate Pro allows users to import vector files created in a design program such as Illustrator which contains both the cut line and the print file.