All Products
BarTender prints 2-3 Labels and then stops, displaying either Error 3700 or Error 3721 (LX Series Printers).
BarTender prints 2-3 Labels and then stops, displaying either Error 3700 or Error 3721 (LX Series Printers). A Windows Automatic Update has caused a problem in the BarTender software which produces this problem. Check out this article on ...
Ink is not soaking into the label. It stays on the surface and doesn't dry. (LX800-810-400-900)
Ink is not soaking into the label. It stays on the surface and doesn't dry. (LX800-810-400-900) The LX800-810-400-900 requires Inkjet printable stock. Since inkjet printing is fairly new to the label printing industry, a vast majority of label ...
Bar codes are printing with variable line width. Part of the bar code prints with thicker lines.
Bar codes are printing with variable line width. Part of the bar code prints with thicker lines. This is caused by another object overlapping the bar code object. Even if this object has a white background and cannot be seen on screen it can cause ...
The pause light on the LX800/LX810/LX900 starts flashing when I try to print. I receive the message "It appears the label stock may be empty."
The pause light on the LX800/LX810/LX900 starts flashing when I try to print. I receive the message "It appears the label stock may be empty." If you receive this message, or you see this flashing light indicator you may be out of label stock or ...
Receive error out of paper or end of roll but there are still labels on the core. (LX900-LX810)
Receive error out of paper or end of roll but there are still labels on the core. (LX900-LX810) 1. Labels on the roll may be sticking together. This may prevent the printer from creating a slack loop under the roll. Try a new roll of stock. 2. ...
How do I over bleed the printed image so I can ensure the image covers the entire label? (LX Series Printers)
Over bleeding forces the printer to print beyond the edges of your label to compensate for the printer not accurately placing the images on the label. The printer has a small margin for error (Approximately +/- 0.5mm) when it comes to placing an ...
How do I correctly load the label stock to avoid feeding and printed image alignment offset problems? (LX Series)
Incorrect loading of the label stock is the number one reason for horizontally or vertically offset images and a variety of other feeding problems. Below is a top view of the printer with the cover open. There are several main areas to watch for when ...
How to manually clean a clogged print head with an Ultrasonic Jewelry Cleaner. (LX900/Bravo 4100 Series)
While the easiest method for cleaning print heads is to use the built-in clean/purge function in the software, sometimes print heads are too clogged for this method to work. This is often the case if the print head has been left outside the printer ...
Do Primera Printers require any regular maintenance?
In most cases, the Bravo Duplicators or LX Series Printers need no regular maintenance. However, there are a few things that can be done when they show signs of ink build-up or label debris build-up. 1. Encoder Strip. Periodically check the encoder ...
Primera Software only works when logged in as the administrator. What specific rights are required (PTPublisher, PrintHub, Status Monitor, Printer Driver, etc)?
First, to install the software with the proper rights install it while logged into the user who will be running the program. You may also give specific rights using the procedures below: 1. Printer. The administrator must open the Printers and ...