BarTender prints 2-3 Labels and then stops, displaying either Error 3700 or Error 3721 (LX Series Printers).

• Related Articles

• LX Series Printer prints a partial label and restarts/resets in the middle of a job. (LX910, LX3000)

  Sometimes the printer will restart if it encounters an error or an interruption in the data flow from the computer over the USB cable. It can be hard to realize that the printer is restarting if you don't see it happen. Instead at the end of the job, ...

• How do I create a label template in Bartender? (LX Series Printer)

  When you open BarTender you will be given the choice to select an existing label or create a new one using a wizard. Use the following instructions as a guide through the wizard setup process. 1. Choose "Start a new BarTender document..." 2.      ...

• My label printers skips labels between prints, feeds out blank labels or is printing over the same place. (LX500, LX600, LX610, LX910, LX2000, LX3000).

  The printer will skip one label before printing for the first time after loading a new roll of label stock. This is to prevent jamming of labels and cannot be disabled. The printer should not skip labels between consecutive print jobs. If the printer ...

• How can I print circular or round labels using the LX Series Printers?

  1. Design.  If you are able to adjust your image design, these tips will make printing circular labels much easier.  Circular labels work best when the image does not fully cover the label.  However, if you must fully cover the label with ink, it is ...

• There are lines through the text on my cookie/label when printing from BarTender. (Eddie, LX Series)

  There is a known bug in the BarTender software that causes a 1/16" line to print through certain text and fonts.  See example: Workaround Instruction. To fix this issue, first, try a different font.  If you must use the font you have chosen, you can ...