The Bravo's robotic arm places a disc into the printer tray, retracts the tray, but immediately ejects the tray without printing. The left (cartridge) light starts flashing.

Article # 207963 - The Bravo's robotic arm places a disc into the printer tray, retracts the tray, but immediately ejects the tray without printing. The left (cartridge) light starts flashing.

To fix this issue, Run the Calibrate Last Disc (PC) or Calibrate One Disc Offset (MAC) utility.

For Windows, run the exe after you have downloaded it. It will prompt you to place one and only one disc in each bin. After you click OK it will touch each disc to check for proper measurement. The calibration will then be complete.

For Mac, follow the instructions for installation and then find the Calibrate Last Disc (Calibrate One Disc Offset) section and follow the instructions above.

Bravo II, XR, OptiVault - PC	Download Calibrate Last Disc Utility
Bravo II/XR - MAC	Download Calibration Instructions and Utility	BravoPro - PC	Download Calibrate Last Disc Utility	BravoPro - MAC	Download Calibration Instruction and Utility

Article ID: 45036

Related Articles
My Bravo printer tray does not fully retract. It stops half way and then the cartridge (left) light blinks rapidly.
My Bravo printer tray does not fully retract. It stops half way and then the cartridge (left) light blinks rapidly. There is probably a disc stuck behind the printer tray which is preventing it from moving all the way back into the printer. You ...
I receive a slow flashing Ink Cartridge (Left) Light after the first disc is printed. The Bravo never puts the printed disc in the output bin.
I receive a slow flashing Ink Cartridge (Left) Light after the first disc is printed. The Bravo never puts the printed disc in the output bin. This problem can be caused by several things. 1. SureThing label setup. You may have a problem with how you ...
The printer is printing over and over on the same disc -or- an Out of Paper message appears after the first disc is printed -or- the cartridge (left) light is flashing rapidly after the disc is printed.
The printer is printing over and over on the same disc -or- an Out of Paper message appears after the first disc is printed -or- the cartridge (left) light is flashing slowly after the disc is printed. This problem can be caused by several items. ...
Error - multiple discs have been placed in the recorder or printer but they were not - Problems picking last disc from bin - It says it is empty but it is not - After the last disc is picked, a flashing cartridge light is displayed after checking for a double pick.
For BravoPro Xi, 4100 or 4200 Series Only: 1. In PTPublisher, Go to the Tools Menu - Calibrate the Disc Publisher. (For Mac: Go to the PTPublisher Menu - Calibrate Robot) 2. Find the "Other Calibrations" section at the bottom. 3. If the error ...
Bravo/Bravo II/BravoPro will not print, there is a flashing ink cartridge (left) button and multiple "Disc Publisher command.." prints queued in the printer queue.
This is most likely due to a corrupted printer driver. Delete and reinstall the driver. This could also be the result of a USB communication problem caused by an incompatible USB chipset either on the motherboard\onboard USB port, or on the USB 2.0 ...

The Bravo's robotic arm places a disc into the printer tray, retracts the tray, but immediately ejects the tray without printing. The left (cartridge) light starts flashing.

The Bravo's robotic arm places a disc into the printer tray, retracts the tray, but immediately ejects the tray without printing. The left (cartridge) light starts flashing.

Related Articles

My Bravo printer tray does not fully retract. It stops half way and then the cartridge (left) light blinks rapidly.

I receive a slow flashing Ink Cartridge (Left) Light after the first disc is printed. The Bravo never puts the printed disc in the output bin.

The printer is printing over and over on the same disc -or- an Out of Paper message appears after the first disc is printed -or- the cartridge (left) light is flashing rapidly after the disc is printed.

Error - multiple discs have been placed in the recorder or printer but they were not - Problems picking last disc from bin - It says it is empty but it is not - After the last disc is picked, a flashing cartridge light is displayed after checking for a double pick.

Bravo/Bravo II/BravoPro will not print, there is a flashing ink cartridge (left) button and multiple "Disc Publisher command.." prints queued in the printer queue.