The printer is printing over and over on the same disc -or- an Out of Paper message appears after the first disc is printed -or- the cartridge (left) light is flashing rapidly after the disc is printed.
The printer is printing over and over on the same disc -or- an Out of Paper message appears after the first disc is printed -or- the cartridge (left) light is flashing slowly after the disc is printed.
This problem can be caused by several items.
1. SureThing label setup.
You may have a problem with how you set up your label. If you have multiple CD faces selected for this particular label, it will print over and over on the same CD or give the out of paper message. In SureThing above the label you will see a tab named CD Face (1 of 1). If you see anything other than (1 of 1) you will have problems printing multiple labels on one CD. Click the Del... button to delete extra CD face layers, recreate the label or try another label.
2. Label Setup.
Other design programs such as Adobe Photoshop may have similar features that could cause multiple labels to print on the same disc. Recreate the label or try printing a new label.
3. SureThing Deluxe.
If you have SureThing Deluxe 4.x there are many different CD/DVD template options to choose from when setting up your label. Make sure you select the correct template as shown in the diagram below.
4. Merge file.
Certain SureThing merge file setups may cause this problem. Try a label without a merge field.
5. System Resources.
Make sure your PC is up to specifications and that you are not running other programs or using other peripherals while the unit is running. It is very sensitive to system resources and uses them heavily especially when burning and printing at the same time. Your PC should at least be a 700 MHz Pentium III processor, 512Mb RAM. Try running your job on another computer.
Article ID: 44627Related Articles
I receive a slow flashing Ink Cartridge (Left) Light after the first disc is printed. The Bravo never puts the printed disc in the output bin.
I receive a slow flashing Ink Cartridge (Left) Light after the first disc is printed. The Bravo never puts the printed disc in the output bin. This problem can be caused by several things. 1. SureThing label setup. You may have a problem with how you ...The Bravo's robotic arm places a disc into the printer tray, retracts the tray, but immediately ejects the tray without printing. The left (cartridge) light starts flashing.
Article # 207963 - The Bravo's robotic arm places a disc into the printer tray, retracts the tray, but immediately ejects the tray without printing. The left (cartridge) light starts flashing. To fix this issue, Run the Calibrate Last Disc (PC) or ...My Bravo printer tray does not fully retract. It stops half way and then the cartridge (left) light blinks rapidly.
My Bravo printer tray does not fully retract. It stops half way and then the cartridge (left) light blinks rapidly. There is probably a disc stuck behind the printer tray which is preventing it from moving all the way back into the printer. You ...Paper Out Error is displayed in PrintHub (LX610).
Normally, the paper out error indicates that you are at the end of a roll of label stock. You will need to load another roll of media in the printer. If the media is loaded, and the error appears when you send at print, or the error appears at ...My Primera Printer is not printing - The printed file appears in the print queue and then disappears after a few moments. (PC Only)
A. Grant proper access rights. Normally this occurs during the installation process. However, you can verify the proper rights are given using this article. B. Advanced Printing Features. 1. Browse to or search for Printers and Scanners. 2. Click ...