My Bravo printer tray does not fully retract. It stops half way and then the cartridge (left) light blinks rapidly.
My Bravo printer tray does not fully retract. It stops half way and then the cartridge (left) light blinks rapidly.
There is probably a disc stuck behind the printer tray which is preventing it from moving all the way back into the printer. You will need to remove that disc. Sometimes it is helpful to pick up the Bravo and tilt it forward slightly and then move it side to side and up and down. This can shake the disc loose and allow the tray to move freely.
Article ID: 44699
Related Articles
The Bravo's robotic arm places a disc into the printer tray, retracts the tray, but immediately ejects the tray without printing. The left (cartridge) light starts flashing.
Article # 207963 - The Bravo's robotic arm places a disc into the printer tray, retracts the tray, but immediately ejects the tray without printing. The left (cartridge) light starts flashing. To fix this issue, Run the Calibrate Last Disc (PC) or ...
I receive Internal Printer Communications errors or stalls indicated by the flashing Ink Cartridge (left) button.
I receive Internal Printer Communications errors or stalls indicated by the flashing Ink Cartridge (left) button. For "Internal Printer Communications" errors or stalls, try the following maintenance procedures: 1. Guide Shaft. Power the Bravo off ...
The Printer portion of the Bravo, Bravo II, BravoPro or Signature/Composer combination is not printing. It burns the disc and then stops when the disc is placed in the printer tray.
The Printer portion of the Bravo, Bravo II, BravoPro or Signature/Composer combination is not printing. It burns the disc and then stops when the disc is placed in the printer tray. (This article applies to PC users only.) There are several things to ...
My Bravo/Bravo II is only printing half or part of a CD or DVD.
My Bravo/Bravo II is only printing half or part of a CD or DVD. The solution to your problem depends on what type of error you are getting. Does the Bravo have a flashing cartridge light on the top? If it does, then there is a tray stall of some ...
The power light is flickering/flashing whenever I try to print or when the unit is first turned on. The printer will not print. (Bravo, Bravo II, Bravo XR, Signature)
The power light is flickering/flashing whenever I try to print or when the unit is first turned on. The printer will not print. (Bravo, Bravo II, Bravo XR, Signature) The blinking power light indicates that the unit has a cartridge problem. There ...