Printing labels via SureThing 5.x that were originally 3.15 labels causes off center printing -or- printing settings will not change.
Printing labels via SureThing 5.x that were originally 3.15 labels causes off center printing -or- printing settings will not change.
Problem: Earlier versions of SureThing 5.x caused upgraded labels from 3.15 to be printed off center if they were printed as part of a print and burn job via PrimoDVD or PTPublisher. This only happens on labels that were originally 3.15 labels.
Solution: Upgrade to SureThing 5.0.577 or higher. Once upgraded, all future 3.15 labels will be upgraded without issue. This will not affect 3.15 labels that were opened in 5.x and then saved. These labels will have to be manually fixed by changing the label to the correct template. See instructions below. Contact tech support for a username and password to download SureThing.
Instructions for manually changing print template in SureThing 5.x
1. Click the template name above the disc design.
2. You will see two options in the left most column. Set the media type to CD/DVD Printer.
3. The new template name above your disc design will be Primera 120mm Disc - Full Face. 
4. Now save the label. The new template will be saved with your design.
Related Articles
My image is not printing centered on my discs (Bravo Disc Publisher Series - PTPublisher)
This may be due to: 1. Ink on the Print Tray. Clean any excess ink that has accumulated on the printer tray with rubbing alcohol and a paper towel. Ink can cause the disc to stick on the tray and NOT slide into the correct position for printing. This ...Colors are printing wrong. Colors are not accurate. Colors are not matching. (Eddie)
There are several possible reasons for colors to print incorrectly. The first step is to print a clean print on your cookie or a cardboard coaster. 1. Print a Clean Print. 2. Print your design or the Clean Print on a Cardboard Coaster or Piece of ...How do I completely Remove and Reinstall SureThing?
Occasionally, SureThing registry settings that allow PTPublisher to communicate with SureThing may become corrupted. This is especially likely if multiple versions of SureThing have been installed. Use these instructions to uninstall and reinstall ...How do I print my labels all the way to the center or outer edge of the disc?
How do I print my labels all the way to the center or outer edge of the disc? To make the printer print closer to the center you need to adjust the Center Size in the driver preferences. Go to the Start Menu - Control Panel - Printers - Right ...Will my clear labels with clear liner work with the AP360/AP362 or the AP550?
AP360 - AP362 uses a physical flag sensor to detect gaps between labels. The AP360/362 will work with Clear labels with a clear PET liner in most cases as long as the liner and the label are not too thin and the adhesive isn't too strong. The danger ...