How do I replace the drive in my Bravo Disc Publisher?

Bravo 4200 and 4100 Series

For these models, the drive housing drops out the bottom.  It is very easy to replace and a non-technical person could do it in about an hour.  See the instructions below.

1. Purchase Replacement DVD Drive
   
2. Purchase Replacement Blu-ray Drive

Bravo SE-3 Disc Publisher

For this model, the cover must be removed.  This is more difficult and is recommended for technical users.  Refer to the instructions attached. 

• Related Articles

• Can I install CD / DVD / Blu-ray drive(s) in my Disc Publisher?

  Primera will install drives for the flat rate repair fee associated with your product. If your unit was not originally a BLU unit Primera DOES NOT offer upgrades of any kind to Blu-ray drives.   If you are out of warranty and decide to install drives ...

• My image is not printing centered on my discs (Bravo Disc Publisher Series - PTPublisher)

  This may be due to: 1. Ink on the Print Tray. Clean any excess ink that has accumulated on the printer tray with rubbing alcohol and a paper towel. Ink can cause the disc to stick on the tray and NOT slide into the correct position for printing. This ...

• The eSATA card that came with my Blu-ray Bravo Disc Publisher does not work in my iMac, Macbook or PC. (Bravo 4100 Blu Series, Bravo SE Blu, Bravo XRP Blu)

    The eSATA card that came with my Blu-ray Bravo Disc Publisher does not work in my iMac, Macbook, MacPro or PC.  (Bravo 4100 Blu Series, Bravo SE Blu, Bravo XRP Blu) If the included eSATA PCI express card does not work with your computer either ...

• PTPublisher for Mac: How to calibrate printer and drive picking depth positions for a Disc Publisher. Fix Error: Multiple discs were placed in the printer or drive tray

  1. Open Ptpublisher. 2. Once open at the top next to the apple logo select Ptpublisher then select Calibrate robot... 3. Click Calibrate Disc in Printer if you are getting an error that multiple discs were placed in the printer tray but only one was ...

• My disc publisher is picking two or more discs at the same time. (Bravo 4100, 4200, SE, SE-3, Bravo Pro, XRP)

  The robotic arm is only physically capable of holding one disc at a time because it is designed to hold only the standard thickness of the media. However, there are a few things that would cause discs to stick together.  New Media. New media taken ...