How do I calibrate the ADL-MAX bins? How do I re-calibrate the Disc Publisher tray and drive(s) to the ADL-MAX?
How do I calibrate the ADL-MAX bins? How do I re-calibrate the Disc Publisher tray and drive(s) to the ADL-MAX?
The first time you open the PrimoDVD or RoboPrint software you will be prompted to calibrate the ADL-MAX to the Disc Publisher. The pick positions for the bins are factory-calibrated. If re-calibration or fine-tuning is needed, you can access the calibration wizard using the following instructions.
1. Go to the Robotics menu - Choose Options. (If you are using RoboPrint, click the Robot Options button)
2. Click the Calibrate ADL-MAX button.
3. The Calibration Menu will appear.
Click on the desired calibration. A description of each is provided below:
1. Printer / Recorder position. This is the same calibration wizard that appeared the first time you opened the software. Use this to fix picking problems from the printer tray or recorders.
2. Last Disc calibration. If you receive errors such as: multiple discs have been placed in the recorder or printer but they were not; Problems picking last disc from bin - It says it is empty but it is not; After the last disc is picked a flashing cartridge light appears. Before starting this calibration you will be prompted to place one disc in each of the ADL-MAX bins.
3. Bin Positions. The bin picking positions are factory calibrated. However, if the disc is being dropped as it is being lifted from the bin or if the disc is rubbing on the side of the bin as it is being lifted, you may need to calibrate the bins. Click this button to start this calibration wizard.
Article ID: 45032Related Articles
The ADL-MAX is not picking discs from the printer tray after the Disc Publisher prints a disc.
The ADL-MAX is not picking discs from the printer tray after the Disc Publisher prints a disc. 1. ADL-MAX Placement. You must Place the ADL-MAX on a flat surface with less than 1/16 inch sag. Placing the ADL-MAX on an uneven surface may result in ...PTPublisher for Mac: How to calibrate printer and drive picking depth positions for a Disc Publisher. Fix Error: Multiple discs were placed in the printer or drive tray
1. Open Ptpublisher. 2. Once open at the top next to the apple logo select Ptpublisher then select Calibrate robot... 3. Click Calibrate Disc in Printer if you are getting an error that multiple discs were placed in the printer tray but only one was ...Can I install CD / DVD / Blu-ray drive(s) in my Disc Publisher?
Primera will install drives for the flat rate repair fee associated with your product. If your unit was not originally a BLU unit Primera DOES NOT offer upgrades of any kind to Blu-ray drives. If you are out of warranty and decide to install drives ...How do I load the ADL-MAX bins?
How do I load the ADL-MAX bins? The far left bin of the ADL-MAX and the left bin of the Disc Publisher should be empty. The front left bin is the first bin that discs are picked from. The left bin of the Disc Publisher is used for rejects. See the ...The computer or the Disc Publisher does not recognize that the ADL-MAX is connected. The ADL-MAX is not being used even though it is connected.
The computer or the Disc Publisher does not recognize that the ADL-MAX is connected. The ADL-MAX is not being used even though it is connected. Two components need to be installed in order to use the ADL-MAX with a Disc Publisher. 1. ADL-MAX ...