Bravo SE-SE-3-4100-4200
PC will not boot up after installing PTPublisher - Error Driver cannot Load on this device (Bravo Disc Publishers)
The error may be related to Px Engine security issues on some PCs with enhanced kernel-level security / core isolation memory protection / memory integrity. Follow these steps to update the : Download the Zip file: ...
How do I replace the drive in my Bravo Disc Publisher?
Bravo 4200 and 4100 Series For these models, the drive housing drops out the bottom. It is very easy to replace and a non-technical person could do it in about an hour. See the instructions below. Purchase Replacement DVD Drive Purchase Replacement ...
PTPublisher for Mac: How to calibrate printer and drive picking depth positions for a Disc Publisher. Fix Error: Multiple discs were placed in the printer or drive tray
1. Open Ptpublisher. 2. Once open at the top next to the apple logo select Ptpublisher then select Calibrate robot... 3. Click Calibrate Disc in Printer if you are getting an error that multiple discs were placed in the printer tray but only one was ...
How to use Discover files in PTPublisher 4.0 for OS 10.15 Catalina or higher?
In PTPublisher 4.0 we were forced to remove Discover disc design software because it was a 32-bit application. Mac OS 10.15 Catalina only supports 64-bit software so this change was necessary to make PTPublisher compatible. However, you will still ...
Bravo 4100/4200 Series – Picking disc from the left and not the right and when the job is done it places it through the front exit.
Solution: Kiosk Mode is Enabled. Disable it to fix the problem. See instructions below. 1. Open PTPublisher. 2. On the toolbar at the top click on tools then options. 3. Then on the robot options tab uncheck the box "Kiosk Mode". 4. Then on the ...
How do I completely remove and reinstall a Primera printer driver on Mac OS10, OS11, OS12, OS13 and higher?
1. Unplug the USB cable from the back of your unit. 2. Go to Apple - System Preferences - Print & Fax. 3. Select your printer listed on the left pane of the window and click the minus (-) button. 4. Select 'Go' from the Finder Menu and select 'Go to ...
My disc publisher is picking two or more discs at the same time. (Bravo 4100, 4200, SE, SE-3, Bravo Pro, XRP)
The robotic arm is only physically capable of holding one disc at a time because it is designed to hold only the standard thickness of the media. However, there are a few things that would cause discs to stick together. New Media. New media taken ...
Discs are rejected with burn or recording engine errors. I receive software error 101 or burned discs are rejected down the center chute (PTPublisher).
Before troubleshooting a burning problem consider the following questions: When does the burn failure occur? The PTPublisher software can reject the disc as bad at any time during a burn. It is often important to determine when the reject occurs. If ...
Discs are printing with poor quality or missing colors. (4100 Series)
Try the following solutions: 1. Change the Cartridge. Check your cartridge levels. If the lowest percentage color corresponds to a missing color in your print, replace that cartridge. Even if the software reports that the cartridge has 30% ink ...
No Robot Found (Error message received after opening PTPublisher for PC)
No Robot Found (Error message received after opening PTPublisher for PC) This error indicates that the computer is not communicating with: A. the recorder (burning) drive(s) in the robot and/or B. the printer in the robot. To determine which is ...