Windows 10 Update 1803 causes incompatibility with Bravo Pro Xi Driver
Windows 10 Update 1803 (5-10-2018) causes driver to no longer communicate with the Bravo Pro Xi.
Solutions:
Option 1: Uninstall the 1803 Windows Update.
Option 2: Uninstall the Bravo Pro Xi Driver. Follow this article. Manually reinstall the driver as an LPT 1 port driver. After installing successfully, manually switch the port to USB 001 or the next available USB port.
- Go to Control Panel - Devices and Printers.
- Choose "Add a Printer".
- Choose "the printer that I have wasn't listed"
- Choose "Add a local printer or network printer with manual settings".
- Choose "Use an existing port: LPT 1"
- Choose "Have Disk". Browse to the location of the downloaded driver. (C:\Users\<currentUser>\AppData\Local\Temp\Setup\PostSetup)
- After installation is complete right click on the printer driver and choose "printer properties"
- Select the "Ports" tab.
- Uncheck LPT1. Select USB001 or the only remaining open USB port. (There should be one since the Pro Xi was previously installed using this port)
Article ID: 96442
Related Articles
How do I update my firmware, printer driver or software? (LX Series, Eddie and IP60)
For PC: 1. Open PrintHub 2. Click on Settings 3. Select the Update Tab 4. Click the "Check for Updates" button. Latest Version. If you click Check for Updates and receive the message "No updates Found," you are already on the latest version of the ...
Print Queue- PT Status Monitor says Printing, but there's no activity on the printer. LX400, LX900, LX1000, LX2000 (Windows 10 1903 release)
Windows 10 release 1903 causes these issues. Try the following solutions: 1. Update to the latest version of Windows. Windows 10 release 2004 fixes this issue. Alternatively, you may upgrade your existing version of Windows 1903 or 1909 with a ...
My Bravo (SE, SE-3, II, XR, XRP, Pro, Xi-Series, 4100, 4200 Series) is not picking discs or is dropping discs?
Where and How is it failing? First, determine exactly where and how the robot is failing to pick. To do this, operate the unit with the cover open. You will need to trick the lid sensor into believing the unit's cover is still closed. Follow this ...
How do I update an existing Windows Driver to the latest version.
How do I update an existing Windows Driver to the latest version? If you already have a working driver for your Primera product installed, follow this procedure to update it to the latest version. 1. Go to the Start Menu - Control Panel - Printers ...
Filter Failed message appears in print queue. Eddie or LX Series Printer is not printing. Ventura, Catalina, Big Sur, Monterey, Sonoma and Sequoia require new drivers (Mac).
Try these steps in order. 1. Install the latest version. Occasionally, the driver will be corrupted after an OS update. Download the latest version from the products download page. You can find the latest software for your product at the location ...