Where can I buy premade blank unprinted cookies for my Eddie?
Unfortunately, Primera no longer sells blank unprinted cookies or icing kits. However, you can purchase them directly from the following Vendors:
1. Lady Fortunes: https://www.ladyfortunes.com/
Note: This information is provided for informational use only.
Primera does not endorse these products nor have we tested them.
Article ID: 083121
Related Articles
What size/type cookies can I print to with my Eddie?
The cookie size and shape you can print depends on whether or not you are using the carousel and other settings. You have more flexibility in Manual Mode/Single Cookie mode. There are several modes available. See the specifications for each below. 1. ...
Error Message: Remove Cookie/Cookie was left in the printer after power up. However, there is no cookie present on the platform. (Eddie)
If you receive this error after powering up Eddie, follow the steps below. If you receive this error in the middle of printing, it probably means that Eddie needed to restart for some reason, and since it was in the middle of printing when it ...
How to enable Manual Feed Mode for oversized or irregular shaped cookies (Eddie).
Manual feed mode allows you to load cookies by hand directly to the print platform. This can be used for oversized or irregular shaped cookies that don't fit well on the carousel platter. To enable manual feed: 1. Update to the latest firmware 1.25 ...
Poor Print Quality, Blurry Printing, Print Smearing, faded prints, or splotchy prints on my Cookie or Food Item. (Eddie)
1. Clean the Cartridge. Follow the procedures in this article to clean the cartridge. However, instead of using alcohol to clean the cartridge, use distilled or bottled water. Tip! Leave the printer powered on when it is not in use to maintain ...
The cookie does not print centered. (Eddie).
A. Try this First Your cookie MUST be touching two triangle spacers. When using the carousel, Eddie will center print images on your cookies automatically but only if your cookie is touching two triangle spacers. (round spacer on earlier models). ...