When pressing Run System Forward (arrow to the right) the media stops after moving only a small amount. (FX1200)

When pressing Run System Forward (arrow to the right) the media stops after moving only a small amount. (FX1200)

1. Make sure the cover is closed on the cutter.

2. Make sure there are no errors on the Run tab. For example an out of media error will produce this condition.

3. Check the following touch screen settings. Go to Start - Configure Utility - Settings Tab.

Make sure the large button at the bottom of the screen says "Normal Mode" - To change, press the button repeatedly to scroll through the options.
Press the Option button - Make sure the bottom two items are checked. Most importantly, make sure "Auto Right Click" is unchecked.

Article ID: 44842

Related Articles
The smart Chip in my Primera LX610 media is defective. When inserted the media is not recognized as Digital Die-cut Media. The media feeds forward and back 12". When the print is sent, Gap Sensing Error is displayed or Non Digital Die-Cut Error message is displayed
When you insert digital die-cut media you should see an icon in the upper left corner of print-hub indicating you have Digital Die-Cut Media and a corresponding percentage remaining. If you do not see the icon make sure your media is digital die-cut ...
The AP360/AP362/AP380 stops during label application or you have to press the foot switch twice to complete the application.
The applicator stops because the sensor that detects gaps between labels was tripped. The sensor is a physical flag sensor which is a piece of light metal that keeps in contact with the front of the label stock as it moves. When you press the ...
My 8x/16x DVD drive burns my data on 8x/12x/16x media in the same amount of time as my 4x media?
My 8x/16x DVD drive burns my data on 8x/12x/16x media in the same amount of time as my 4x media? 1. Port Speed. First of all, make sure you have your publisher connected to a USB 2.0 port. See this article for details. 2. Drive Speed. Make sure your ...
After ripping one CD, PTRip fails all subsequent discs until the job stops.
After ripping one CD, PTRip fails all subsequent discs until the job stops. When importing to iTunes you must turn AutoRun on to consistently, automatically rip discs that are placed in the burner by the disc publisher. To turn AutoRun on change ...
During printing the printhead often quickly moves all the way to the right and back -or- less often it will move to the right and stop for a few seconds and then continue printing. (LX900)
During printing the printhead often quickly moves all the way to the right and back -or- less often it will move to the right and stop for a few seconds and then continue printing. (LX900) These actions are part of the printer's automatic self ...

When pressing Run System Forward (arrow to the right) the media stops after moving only a small amount. (FX1200)

When pressing Run System Forward (arrow to the right) the media stops after moving only a small amount. (FX1200)

Related Articles

The smart Chip in my Primera LX610 media is defective. When inserted the media is not recognized as Digital Die-cut Media. The media feeds forward and back 12". When the print is sent, Gap Sensing Error is displayed or Non Digital Die-Cut Error message is displayed

The AP360/AP362/AP380 stops during label application or you have to press the foot switch twice to complete the application.

My 8x/16x DVD drive burns my data on 8x/12x/16x media in the same amount of time as my 4x media?

After ripping one CD, PTRip fails all subsequent discs until the job stops.

During printing the printhead often quickly moves all the way to the right and back -or- less often it will move to the right and stop for a few seconds and then continue printing. (LX900)