When I turn on (plug in) my Bravo II the cartridges never separate from the arm and I get a flashing Ink (left) light.

• Related Articles

• How do I get the most ink from my cartridges, yet maintain good quality? (Signature, Bravo, Bravo II only)

  How do I get the most ink from my cartridges, yet maintain good quality? (Signature, Bravo, Bravo II only) The following settings affect ink usage. These setting can be found in the printer driver preferences. PC: Go to Start - Control Panel - ...

• I receive a slow flashing Ink Cartridge (Left) Light after the first disc is printed. The Bravo never puts the printed disc in the output bin.

  I receive a slow flashing Ink Cartridge (Left) Light after the first disc is printed. The Bravo never puts the printed disc in the output bin. This problem can be caused by several things. 1. SureThing label setup. You may have a problem with how you ...

• The Bravo's robotic arm places a disc into the printer tray, retracts the tray, but immediately ejects the tray without printing. The left (cartridge) light starts flashing.

    Article # 207963 - The Bravo's robotic arm places a disc into the printer tray, retracts the tray, but immediately ejects the tray without printing. The left (cartridge) light starts flashing. To fix this issue, Run the Calibrate Last Disc (PC) or ...

• The power light is flickering/flashing whenever I try to print or when the unit is first turned on. The printer will not print. (Bravo, Bravo II, Bravo XR, Signature)

  The power light is flickering/flashing whenever I try to print or when the unit is first turned on. The printer will not print. (Bravo, Bravo II, Bravo XR, Signature)   The blinking power light indicates that the unit has a cartridge problem. There ...

• My image is not printing centered on my discs (Bravo Disc Publisher Series - PTPublisher)

  This may be due to: 1. Ink on the Print Tray. Clean any excess ink that has accumulated on the printer tray with rubbing alcohol and a paper towel. Ink can cause the disc to stick on the tray and NOT slide into the correct position for printing. This ...