When I press the ink cartridge button to load cartridges the printer tray ejects. How do I change cartridges? (ADL-MAX)
When I press the ink cartridge button to load cartridges the printer tray ejects. How do I change cartridges? (ADL-MAX)
When the ADL-MAX is connected, a disable lid sensor command is sent to the Disc Publisher. This causes the buttons to function as if the lid were closed even if it is open. For this reason you will need to change the cartridges using the PrimoDVD, RoboPrint, or Printer Driver software. If the cartridge becomes empty during a job you will be prompted to change the cartridges. If you would like to change the cartridges manually, follow these instructions:
1. Go to the Robotics Menu - Choose Options.
2. Click Change Cartridge. The cartridge will move into change position. Follow the prompts to complete the cartridge change. 
Related Articles
The ADL-MAX is not picking discs from the printer tray after the Disc Publisher prints a disc.
The ADL-MAX is not picking discs from the printer tray after the Disc Publisher prints a disc. 1. ADL-MAX Placement. You must Place the ADL-MAX on a flat surface with less than 1/16 inch sag. Placing the ADL-MAX on an uneven surface may result in ...Colors are printing wrong. Colors are not accurate. Colors are not matching. (Eddie)
There are several possible reasons for colors to print incorrectly. The first step is to print a clean print on your cookie or a cardboard coaster. 1. Print a Clean Print. 2. Print your design or the Clean Print on a Cardboard Coaster or Piece of ...Error: The printer couldn't print <Document Name>. Unable to connect to Printer. Printer in Error State. Generic Microsoft Windows Error Printing on Edible Ink Printer. (Eddie) (PC Only).
1. Connect the USB, connect power, and switch the printer on. 2. Print Hub. "The printer couldn't print <Document Name>" This generic Microsoft Windows error may occur after a Windows Update. A more specific error may be displayed in the Primera ...When I press the Ribbon Cartridge Eject button on my Inscripta, nothing happens. The ribbon cartridge is not ejected.
When I press the Ribbon Cartridge Eject button on my Inscripta, nothing happens. The ribbon cartridge is not ejected. The ribbon cartridge eject button, is a mechanical button so it requires some force to eject the cartridge. Below is the best ...How do I calibrate the ADL-MAX bins? How do I re-calibrate the Disc Publisher tray and drive(s) to the ADL-MAX?
How do I calibrate the ADL-MAX bins? How do I re-calibrate the Disc Publisher tray and drive(s) to the ADL-MAX? The first time you open the PrimoDVD or RoboPrint software you will be prompted to calibrate the ADL-MAX to the Disc Publisher. The pick ...