What types of Media can I use with my IP60 photo printer?

What types of Media can I use with my IP60 photo printer?

You can only use Primera Media! This media comes from Primera with a smart chip that identifies the media, tracks the percentage remaining, and automatically sets the color-matching profile. The following media is available on our website.  https://www.primera.com/all-supplies/photo-printer-supplies.html


Other media cannot be used even if you take the chip from new/old Primera media for the following reasons:
  1. Old chips cannot be reused once they reach 0% remaining.
  2. Primera media is specially created for our printer to prevent cutting problems.
  3. The dust created from cutting through the inkjet printable topcoat can be excessive on some media. This can cause frequent print cartridge clogging and other problems.
  4. Continuous media from Primera or other label providers should not be used even if you take a chip from a new Primera roll.  This media has not been tested or qualified.  
Article ID: 053124

    • Related Articles

    • What brands or types of media does Primera recommend to use with the CX1200?

        What brands or types of media does Primera recommend to use with the CX1200? Primera recommends using Primera brand label stock with the CX1200 available from our sales department or our online store. ...

    • What type of labels / media can I use in my LX610 to cut my own shapes?

      Two types of media can be used. 1. Digital Die-Cut Labels. If you are using the printer to digitally die-cut your own shapes and sizes only Primera label stock can be used. This media comes from Primera with a smart chip that identifies the media, ...

    • How do I create a label template in Bartender? (LX Series Printer)

      When you open BarTender you will be given the choice to select an existing label or create a new one using a wizard. Use the following instructions as a guide through the wizard setup process. 1. Choose "Start a new BarTender document..." 2.      ...

    • How to turn your Eddie Edible Ink Printer into a Photo booth

      What you will need: Photo booth software. Primera recommends Sparkbooth 7. See the tutorial below. High Resolution Webcam or DSLR camera. 1080p or greater is recommended for webcams. You may add a webcam to your existing PC/Mac or use the integrated ...

    • Not feeding media (IP60)

      Not feeding media or after feeding it backs up the media 1. Check for updates.       a. Open Printhub and click on the Settings button in the lower left hand corner.       b. Click the Update tab       c. Click Update and select the box "Check for ...