What other wireless print servers are available for IP60? (AirCastPro)

• Related Articles

• Can I print wirelessly to my Primera Printer? (LX3000 and Eddie)

  The Eddie, LX3000 or Catalyst can be used out of the box with a USB connection or Ethernet connection.  You can purchase a BrosTrend Wifi Range Extender with an Ethernet port to connect the printer to a wireless network.  You can then print to it ...

• The LX3000 Print Head is printing with Poor Quality, Banding, Streaks, or Missing Colors.

  You may need to replace your print head. The nozzles can wear out over time. Tip! Leave the printer powered on when it is not in use. 1. Clean / Test Print. Print the Clean/Test Print described in this article. Send us a picture of the clean/test ...

• What size/type cookies can I print to with my Eddie?

  The cookie size and shape you can print depends on whether or not you are using the carousel and other settings. You have more flexibility in Manual Mode/Single Cookie mode. There are several modes available. See the specifications for each below. 1. ...

• Can I use PTLink to print wirelessly to the IP60 from a Windows PC?

  While PTLink was designed for printing via AirPrint from a iPad or iPhone it is possible to print using AirPrint from a PC.  Follow these instructions: 1. Connect and install the IP60 first via USB using standard installer. 2. Open Devices and ...

• Can I open the print head lid on my LX3000?

  Occasionally you may need to remove the printhead to clean the nozzles.  Use the instructions in the video below.  You may open and close the lid up to 8 times before the print head will lose its prime and need to be replaced.  Each time you open the ...