What is the difference between Kiss Cut vs Digital Die-cut vs Pre Die-cut? (LX600-LX610-LX910-LX2000-LX500)

• Related Articles

• The smart Chip in my Primera LX610 media is defective. When inserted the media is not recognized as Digital Die-cut Media. The media feeds forward and back 12". When the print is sent, Gap Sensing Error is displayed or Non Digital Die-Cut Error message is displayed

  When you insert digital die-cut media you should see an icon in the upper left corner of print-hub indicating you have Digital Die-Cut Media and a corresponding percentage remaining. If you do not see the icon make sure your media is digital die-cut ...

• How do I use BarTender 2021 to add cut lines to a print template design (LX610 or Catalyst).

  Within BarTender, any shape can be converted to a cutline that your LX610 or Catalyst printer can cut. You must use BarTender version 2021 Ultralite, Professional, or Enterprise. 1.       Click the shape icon on the toolbar. 2.       Drag the shape ...

• Repeating sections of blurry printing - Inconsistent TOF alignment - Printing over on the same label using pre-die-cut labels on (LX600/LX610)

  Issue: Pre Die-cut labels printed on the LX600 or LX610 has inconsistent Top of Form (Vertical) alignment or print over and over on the same label or have repeating sections of blurry printing. The smaller the size down to the minimum of 2", the more ...

• Media Chip Error when using a pre-die-cut roll which only happens when using PTCreate Pro to print. (LX610)

  Issue: Media Chip Error when using a pre-cut roll which only happens when using PTCreate Pro to print. Once the pre-die-cut roll is loaded and a print is done, the error will appear - if you unload and reload, the error will disappear; once you print ...

• Print Alignment Not Available for Digital Die-Cut message appears on the alignment screen in PrintHub. (LX610 Only)

  Print alignment is not available on the LX610 by design because there are no die-cut labels that can be aligned to a print.  Instead, the cut line must be aligned to wherever the printing occurs.  Cut alignment is calibrated at the factory.  However, ...