What is the best location for my AP360/AP362 Label Applicator?
What is the best location for my AP360/AP362 Label Applicator?
The AP360/AP362 works best when it is placed on a narrow table with an open back. The open back allows label liner waste to fall freely to the floor or waste bin. The weight of this material actually helps the applicator feed more smoothly. A narrow table approximately 24" wide allows the operator to comfortably access the front of the applicator without compromising the free fall of the label liner waste off the back of the table. See the illustration below:
Related Articles
Can I use my digitally die cut label roll on an applicator such as the AP360, AP362 or AP550 (LX610)?
Unfortunately, it is not possible to use a digitally die-cut roll on an applicator. Even with the waste matrix removed, and setting the machine in half-speed mode, the liner is too thick to pull through the applicator. This applies to the following ...How to Create A Custom Label Order
1. Go to https://www.primera.com/customlabel/generate/label/ 2. Select your printer type. 3. Then click Select Materials. View the material guide for more information on each material type of look at the pictures below. Premium Gloss Matte BOPP High ...There is a label stuck or jammed in the feed area of my LX Series label printer. How can I remove it and prevent it from happening again?
A. Removal: Usually, it is necessary to disassemble part of the printer to remove the stuck label. This means the unit will need to come to Primera for factory service. However, there are ways to remove these labels without taking apart the ...My Eddie ink is past the best by date or is expired. Can it be replaced?
Can Primera replace expired ink or ink beyond the best-by date? Unfortunately, Primera cannot replace Edible ink because it is beyond its best-by date or expired (6 months from the open date). However, Primera will replace any ink cartridge that is ...How do I correctly load the label stock to avoid feeding and printed image alignment offset problems? (LX Series)
Incorrect loading of the label stock is the number one reason for horizontally or vertically offset images and a variety of other feeding problems. Below is a top view of the printer with the cover open. There are several main areas to watch for when ...