What are the sizes of the printable areas that a Z1 can print?

• Related Articles

• What size/type cookies can I print to with my Eddie?

  The cookie size and shape you can print depends on whether or not you are using the carousel and other settings. You have more flexibility in Manual Mode/Single Cookie mode. There are several modes available. See the specifications for each below. 1. ...

• Smaller diameter, thin or lighter cookies do not print, the image is overlapping itself, the image is not centered, or Cookie out error. (Eddie).

  The reason for this is not always related to the size but instead, it has more to do with the weight.  These cookies are lighter which can allow the cookie to move slightly as it is being scanned for size.   If the cookie is too small or moves during ...

• Eddie stops, pauses or resets in the middle of printing the cookie causing it to smash cookies taller than 0.625" into the top wall of the printer during the start-up routine. (Eddie)

  Sometimes Eddie will restart if it encounters an error. It often causes issues if this happens because you have a cookie on the tray. (or Cookie + Custom Tray) So when it starts up, it either displays an error OR it will smash the cookie into the top ...

• Back or front edge of the print is printing light/faded or is speckled with unprinted areas - general poor transfer. (CX1200)

  Try the following solutions in this order: 1. Change Custom Type 5 to Glossy.  On the printers control panel press the Menu button - Choose Paper Menu - Choose Custom Types - Choose Custom Type 5 - Choose Glossy. Note: MP paper size/type must be set ...

• Eddie Cookie Pro does not Print

  Issue: When you click print, nothing happens, or you get a spinning wheel. Solution: Click on the Settings Gear Icon. Either click Restore Defaults or manually set the saturation to a value of 40% or higher. Explanation: If you lower the saturation ...