What are the Power Supply Specifications for Primera Products?

What are the Power Supply Specifications for Primera Products?

For Bravo, Bravo II, Bravo SE, Bravo SE-3, Optivault, Bravo XR, LX400, LX500, LX810, LX900, LX2000, ADL MAX, AP360/AP362, AP550 and Signature Z6.

Input: 100-240 Vac
Output: 12Vdc, 5.0A, 60W(max)
Polarity: positive = inner / negative = outer (same as image below)
Barrel Outer Diameter = 5mm


See image below for more details.

For Composer, Composer Plus, Composer XL, Inscripta, and Composer Pro

Input: 100-240V
Output: 24V 2.5A
Polarity: positive = inner / negative = outer (same as image above)

For Signature III, IV, Pro

Input 120-127Vac
Output 30Vdc 830MA
Polarity: positive = inner / negative = outer (same as image above)

For Signature Z1

Input: 100-240V
Output: 24V 1.25A
Polarity: positive = inner / negative = outer (same as image above)

For BravoPro, Bravo XRP, BravoProXi Series and Bravo4100 Series and ComposerMAX

These products have a 300W internal power supply with an external switch to switch between 100-120V and 240V systems. A standard grounded three prong female power connector commonly used for computers and monitors can be used to connect to a surge protected power strip.

For Accent, Accent II and DUP-07

These products have an internal power supply that is factory set to either 100-120V or 240V systems. A standard grounded three prong female power connector commonly used for computers and monitors can be used to connect to a surge protected power strip.

Article ID: 45090

    • Related Articles

    • What size/type cookies can I print to with my Eddie?

      The cookie size and shape you can print depends on whether or not you are using the carousel and other settings. You have more flexibility in Manual Mode/Single Cookie mode. There are several modes available. See the specifications for each below. 1. ...

    • What are the Label and Roll Specifications for the LX900?

        LX900 Label Specifications Test all custom made label stock with the intended printer before ordering large quantities! Below is an excerpt from the Users Manual which includes the label and roll specifications: LX900 Label and Roll Specifications ...

    • What are the designer file specifications for the LX610.

      PTCreate Pro allows users to import vector files created in a design program such as Illustrator which contains both the cut line and the print file.  

    • What are the label and roll specifications for the LX800 or LX810?

      LX800/810 Label Specifications Test all custom made label stock with the intended printer before ordering large quantities! Primera’s TuffCoat High Gloss and Semi-Gloss label materials have been specifically designed to be highly absorbent to allow ...

    • What are the Label and Roll Specifications for the LX400 and PX450?

        LX400 & PX450 Label Specifications Test all custom made label stock with the intended printer before ordering large quantities! Primera’s TuffCoat High Gloss and Semi-Gloss label materials have been specifically designed to be highly absorbent to ...