The Z1 is printing light or with poor quality. Not all the text or graphics are being printed on the disc.

• Related Articles

• The Inscripta is printing light or with poor quality. How can I increase print quality?

  The Inscripta is printing light or with poor quality.  How can I increase print quality? Try the following suggestions: Intensity. Try increasing the intensity.  Go to Start - Control Panel - Printers - Right Click on the Optical Disc Printer - ...

• Poor Print Quality, Blurry Printing, Print Smearing, faded prints, or splotchy prints on my Cookie or Food Item. (Eddie)

  1. Clean the Cartridge. Follow the procedures in this article to clean the cartridge. However, instead of using alcohol to clean the cartridge, use distilled or bottled water. Tip! Leave the printer powered on when it is not in use to maintain ...

• Discs are printing with poor quality or missing colors. (4100 Series)

  Try the following solutions: 1. Change the Cartridge. Check your cartridge levels. If the lowest percentage color corresponds to a missing color in your print, replace that cartridge. Even if the software reports that the cartridge has 30% ink ...

• Discs are printing with poor quality or poor color matching, streaks, banding, or missing colors. (BravoPro or XRP Only)

  Discs are printing with poor quality or poor color matching, streaks, banding, or missing colors. (BravoPro or XRP Only) Four print settings affect print quality and color matching on a Bravo Pro or XRP: Print Quality, Disc Surface Quality, Ink ...

• Poor Quality Printing, Banding, Streaks, Missing Colors. My cartridge is defective. What can I do? (LX810, LX910, LX400, LX500, LX600, LX610, IP60, Bravo series, Eddie)

  If the cartridge has not been used for some time, the inkjet nozzles may dry out. 1. Clean / Test Print Print the Clean/Test Print described in this article. Send us a picture of the clean/test print! 2. Clean the Cartridge Manually Remove the ...