The target mark is printing too close to the edge of the label stock (CX1200).

Problem: PTPrint displays target mark in correct position but the printer is printing the target mark too close to the edge of the label stock.

Solution: Completely reinstall PTPrint following these instructions.

Before uninstalling the current version of PTPrint you will need to have access to the CX1200 license files. These are located on the CX1200 installation disc. If you do not have access to the installation disc but already have PTprint installed on a PC, copy the products.ini and products.lcf to your desktop. These files are located in C:\PTprint
Uninstall PTPrint from Add/Remove programs in the Control Panel. (Windows Vista and Windows 7 users will need to go to the Control Panel – Programs & Features - Uninstall a Program)
Delete the PTPrint folder from C:\
Delete the PTPrint folder from C:\Documents and Settings\All Users\Application Data\PTI . (The "Application Data" folder may be a hidden folder.) In Windows Vista and Windows 7 the "PTPublisher" folder is here: C:\ProgramData\PTI
Download and Install the latest version of PTprint here:http://www.primera.com/downloads/support/CX1200/CX1200.html
When running the installer you will be prompted for license files. Insert the CX1200 installation disc and browse to D:\PTprint\App. If you do not have your CX1200 installation disc browse to the Products.lcf file that was copied to the desktop before uninstalling.
Reboot the PC after the install is complete.

Article ID: 61040

Related Articles
How do I correctly load the label stock to avoid feeding and printed image alignment offset problems? (LX Series)
Incorrect loading of the label stock is the number one reason for horizontally or vertically offset images and a variety of other feeding problems. Below is a top view of the printer with the cover open. There are several main areas to watch for when ...
How to Create A Custom Label Order
1. Go to https://www.primera.com/customlabel/generate/label/ 2. Select your printer type. 3. Then click Select Materials. View the material guide for more information on each material type of look at the pictures below. Premium Gloss Matte BOPP High ...
Primera's new Smart Part format for Custom Label Stock Explained
You can now see important information about your label stock embedded within the part number printed on a label inside the core. Read below for instructions on how to decipher this smart part number. SMART PART: The format is: PRI (for Primera) – ...
There is a label stuck or jammed in the feed area of my LX Series label printer. How can I remove it and prevent it from happening again?
A. Removal: Usually, it is necessary to disassemble part of the printer to remove the stuck label. This means the unit will need to come to Primera for factory service. However, there are ways to remove these labels without taking apart the ...
Labels are printing horizontally offset (left to right) on an LX Series printer. The image alignment is printing too far to the left or right. There is white space on the right or left side of my label.
If your labels are printing consistently offset in one direction or if the offset gradually changes from one label to the next, this article applies to you. For sudden changes in the horizontal offset, follow this article. 1. Label Loaded ...

The target mark is printing too close to the edge of the label stock (CX1200).

The target mark is printing too close to the edge of the label stock (CX1200).

Related Articles

How do I correctly load the label stock to avoid feeding and printed image alignment offset problems? (LX Series)

How to Create A Custom Label Order

Primera's new Smart Part format for Custom Label Stock Explained

There is a label stuck or jammed in the feed area of my LX Series label printer. How can I remove it and prevent it from happening again?

Labels are printing horizontally offset (left to right) on an LX Series printer. The image alignment is printing too far to the left or right. There is white space on the right or left side of my label.