The Px Engine did not load correctly. This is probably because some mandatory dlls are missing or damaged. Please try to reinstall the application.
The Px Engine did not load correctly. This is probably because some mandatory dlls are missing or damaged. Please try to reinstall the application.
1. To fix this issue browse to C:\WINDOWS\system32 and delete the following 4 files from the System 32 folder:
Px.dll
PxMas.dll
PxSub.dll
PxWave.dll
2. Reinstall the PrimoDVD application.
3. Reboot the computer and launch the program.
Article ID: 44872
Related Articles
Poor Quality Printing, Banding, Streaks, Missing Colors. My cartridge is defective. What can I do? (LX810, LX910, LX400, LX500, LX600, LX610, IP60, Bravo series, Eddie)
If the cartridge has not been used for some time, the inkjet nozzles may dry out. 1. Clean / Test Print Print the Clean/Test Print described in this article. Send us a picture of the clean/test print! 2. Clean the Cartridge Manually Remove the ...
Missing Cartridge, Invalid Cartridge, Incompatible Cartridge, Incorrect Cartridge, Cartridge not installed correctly, or Cartridge Data Error (LX600, LX610, LX910, Eddie, LX3000 or IP60)
If the cartridge is installed, but this error appears, it may be caused by insufficient contact between the cartridge and the carrier. Try the following: A. Verify the correct Part Number Cartridge for your printer is installed. 53491/53496 = ...
Unable to Communicate with the Robot, please check all connections and try again? (Bravo, Bravo II or BravoPro Only)
Unable to Communicate with the Robot, please check all connections and try again? (Bravo, Bravo II or BravoPro Only) There are several things to check. 1. Local Admin Rights. You must have local administrative rights to the PC running the Bravo. You ...
How do I completely remove a Primera Print Driver? (Windows 7/8/10/11)
Note that you must be the local administrator of your computer in order to remove a Primera printer. Video Tutorial: Manual Driver Removal Video Tutorial: Manual Driver Installation 1. Disconnect the printer from USB or Ethernet. 2. Go to Start > ...
How do I completely remove and reinstall PTPublisher (PC)?
How do I completely remove and reinstall PTPublisher? Please use these instructions to completely remove the program. 1. Windows Vista/7/8/10 Go to Start - Control Panel - Uninstall a program. Find PTPublisher. Click Uninstall. Windows XP - Go to ...