The printer skips one page between every print. (CX1000)
The printer skips one page between every print. (CX1000)
The CX1000 is printing the image too long. It stops printing too late for it to see the next black mark so it has to skip one.
1. Try a stretch calibration. See this article.
2. The Black Mark Repeat Length could be set wrong. Check the stock sticker that came with your label stock for the correct setting or measure the distance from the end of one black mark to the beginning of the next.
3. The Vertical Die spacing could be wrong. Check the stock sticker that came with your label stock for the correct setting or measure the distance from the end of one cut to the beginning of the next (with the web).
Article ID: 44675
Related Articles
Error: The printer couldn't print <Document Name>. Unable to connect to Printer. Printer in Error State. Generic Microsoft Windows Error Printing on Edible Ink Printer. (Eddie) (PC Only).
1. Connect the USB, connect power, and switch the printer on. 2. Print Hub. "The printer couldn't print <Document Name>" This generic Microsoft Windows error may occur after a Windows Update. A more specific error may be displayed in the Primera ...
The LX3000/LX4000 Print Head is printing with Poor Quality, Banding, Streaks, or Missing Colors.
You may need to replace your print head. The nozzles can wear out over time. Tip! Leave the printer powered on when it is not in use to maintain cartridge readiness! 1. Clean / Test Print. Print the Clean/Test Print described in this article. Send us ...
Default page size stuck in the driver causing prints to be cut off on the bottom or right side or skipped labels (LX2000)
To verify you have this problem attempt to change the default page size set in Windows. The default is typically 400 x 300 and can easily be changed. If your default is something else and simply cannot be changed you have this problem. Try the ...
Smaller diameter, thin or lighter cookies do not print, the image is overlapping itself, the image is not centered, or Cookie out error. (Eddie).
The reason for this is not always related to the size but instead, it has more to do with the weight. These cookies are lighter which can allow the cookie to move slightly as it is being scanned for size. If the cookie is too small or moves during ...
What size/type cookies can I print to with my Eddie?
The cookie size and shape you can print depends on whether or not you are using the carousel and other settings. You have more flexibility in Manual Mode/Single Cookie mode. There are several modes available. See the specifications for each below. 1. ...