The laminator leaves a jagged ring of unlaminated area around the middle of the disc.

• Related Articles

• The AP360/AP362/AP380 stops during label application or you have to press the foot switch twice to complete the application.

  The applicator stops because the sensor that detects gaps between labels was tripped. The sensor is a physical flag sensor which is a piece of light metal that keeps in contact with the front of the label stock as it moves. When you press the ...

• Receive error - Failed to Communicate - Print stops in the middle of a disc. (Mac Only)

    Receive error - Failed to Communicate - Print stops in the middle of a disc. (Mac Only) There may not be enough USB bandwidth available for the print to complete successfully.  Remove all other USB connections especially USB drives from the ...

• The disc comes loose and moves around in the printer tray during printing. The printed image on my disc is skewed or squished. While printing I can hear the disc wobbling around.

    The disc comes loose and moves around in the printer tray during printing.  The printed image on my disc is skewed or squished.  While printing I can hear the disc wobbling around. As the tray retracts into the printer with the disc in the tray a ...

• While printing hockey rink or business card discs the disc comes loose and moves around in the printer tray.

    While printing hockey rink or business card discs the disc comes loose and moves around in the printer tray. 1. Make sure the correct size disc is used.  There are multiple different sizes available for each of these discs formats.  The printer ...

• The laminator is laminating with poor quality. What can I do?

  The laminator is laminating with poor quality.  What can I do? Media. The most important factor contributing to poor lamination results is incompatible media. Remember, whether media laminates well has nothing to do with how well it burns or prints. ...