The CX1200 prints only blank pages if when printing an all black label and eventually displays Paper Jam 250.66 (CX1200).
1. Make Sure the PreDiecut check box in the Status Monitor is NOT checked if you have a CX1200.
2. If the printer receives only black printing data it will not work for more than one page. Make sure "Print in Black in White" is NOT checked in the printer driver settings (setup button in PTPrint print window). The printer does not work with this setting checked.
3. If printing a black only image make sure to set the Color Saver setting to OFF.
4. If you must print with the Color Saver setting ON you will need to add a small color dot outside of the cut area in the waste matrix. You can add this dot of color in PTPrint just before printing using the shape tools in the program.
Color Saver is described in more detail in this article.
Article ID: 44918
Related Articles
There is a label stuck or jammed in the feed area of my LX Series label printer. How can I remove it and prevent it from happening again?
A. Removal: Usually, it is necessary to disassemble part of the printer to remove the stuck label. This means the unit will need to come to Primera for factory service. However, there are ways to remove these labels without taking apart the ...
My label printers skips labels between prints, feeds out blank labels or is printing over the same place. (LX500, LX600, LX610, LX910, LX2000, LX3000).
The printer will skip one label before printing for the first time after loading a new roll of label stock. This is to prevent jamming of labels and cannot be disabled. The printer should not skip labels between consecutive print jobs. If the printer ...
Paper Out Error is displayed in PrintHub (LX610).
Normally, the paper out error indicates that you are at the end of a roll of label stock. You will need to load another roll of media in the printer. If the media is loaded, and the error appears when you send at print, or the error appears at ...
How to Create A Custom Label Order
1. Go to https://www.primera.com/customlabel/generate/label/ 2. Select your printer type. 3. Then click Select Materials. View the material guide for more information on each material type of look at the pictures below. Premium Gloss Matte BOPP High ...
CX1200 displays Paper Jam Error 200.28 in A,B,D - or 202.30 in D, K, L.
200.28 A, B, D = Input sensor tripped. Focus on the left side of the printer. 202.30 D, K, L = Output (fuser) sensor tripped. Focus on the right side of the printer. There are many different paper sensors in the CX1200. Either of these errors means ...