The Business Card Adapter Kit does not work with my BravPro. The picking arm stops about 1 inch over the disc.

• Related Articles

• My Business Card Adapter Kit or Kiosk mode software did not install correctly. I receive error messages during or after the installation.

    My Business Card Adapter Kit or Kiosk mode software did not install correctly. I receive error messages during or after the installation. The software that is packaged with the Bravo II already contains the necessary updates that allow Kiosk mode ...

• The AP360/AP362/AP380 stops during label application or you have to press the foot switch twice to complete the application.

  The applicator stops because the sensor that detects gaps between labels was tripped. The sensor is a physical flag sensor which is a piece of light metal that keeps in contact with the front of the label stock as it moves. When you press the ...

• While printing hockey rink or business card discs the disc comes loose and moves around in the printer tray.

    While printing hockey rink or business card discs the disc comes loose and moves around in the printer tray. 1. Make sure the correct size disc is used.  There are multiple different sizes available for each of these discs formats.  The printer ...

• Does the Bravo/Bravo II/BravoPro support business card CDs and if so what sizes are supported?

    Does the Bravo/Bravo II/BravoPro support business card CDs and if so what sizes are supported? Yes! An optional Business Card Adapter Kit is required. It comes with templates and input bins for the following sizes of cards: 80mm mini-disc CDs (201 ...

• My business cards slide around in the printer tray of my Signature IV/Pro/Z6.

  My business cards slide around in the printer tray of my Signature IV/Pro/Z6. 1. Make sure you have the correct size business cards. The correct size is: Business Card = 59mm X 85mm 2 . Also make sure you are using the business card adapter kit which ...