The Bravo Series Duplicator is printing on only one corner of my discs - It prints the rest on the printer tray. (MAC Only)
The Bravo Series Duplicator is printing on only one corner of my discs - It prints the rest on the printer tray. (MAC Only)
In Discus or any printing application, make sure to go to File - Page Setup.
Select Disc Publisher in the Format for: field.
Select CD/DVD in the Paper Size: field.
Click OK
If you do not select the printer or the paper size it may not print at all, or the application may assume that the page size is 8 1/2" x 11". This would cause the Bravo to print part of the image on one portion of the disc and print the rest on the tray.
If you are printing through Discribe see this article.
Article ID: 44727
Related Articles
My image is not printing centered on my discs (Bravo Disc Publisher Series - PTPublisher)
This may be due to: 1. Ink on the Print Tray. Clean any excess ink that has accumulated on the printer tray with rubbing alcohol and a paper towel. Ink can cause the disc to stick on the tray and NOT slide into the correct position for printing. This ...
PTPublisher for Mac: How to calibrate printer and drive picking depth positions for a Disc Publisher. Fix Error: Multiple discs were placed in the printer or drive tray
1. Open Ptpublisher. 2. Once open at the top next to the apple logo select Ptpublisher then select Calibrate robot... 3. Click Calibrate Disc in Printer if you are getting an error that multiple discs were placed in the printer tray but only one was ...
Filter Failed message appears in print queue. Eddie or LX Series Printer is not printing. Ventura, Catalina, Big Sur, Monterey, Sonoma and Sequoia require new drivers (Mac).
Try these steps in order. 1. Install the latest version. Occasionally, the driver will be corrupted after an OS update. Download the latest version from the products download page. You can find the latest software for your product at the location ...
My Bravo 4100 series Disc Publisher or Auto Printer only prints one disc at a time when I print directly from my design program. (Bravo 4100 Series - Mac Only)
My Bravo 4100 series Disc Publisher or Auto Printer only prints one disc at a time when I print directly from my design program. (Bravo 4100 Series - Mac Only) When using Mac OS 10.7 or higher you must print using PTPublisher for Mac to print more ...
The Bravo's robotic arm places a disc into the printer tray, retracts the tray, but immediately ejects the tray without printing. The left (cartridge) light starts flashing.
Article # 207963 - The Bravo's robotic arm places a disc into the printer tray, retracts the tray, but immediately ejects the tray without printing. The left (cartridge) light starts flashing. To fix this issue, Run the Calibrate Last Disc (PC) or ...