The Bravo/Bravo II is not staying powered on. It turns off after initialization.

• Related Articles

• The Bravo / Bravo II will not stay powered on. When it is plugged in it performs initialization and then powers off.

  The Bravo / Bravo II will not stay powered on. When it is plugged in it performs initialization and then powers off. This can sometimes be caused by a faulty print cartridge. Try the following procedure: 1. Remove both cartridges. Since the unit does ...

• My image is not printing centered on my discs (Bravo Disc Publisher Series - PTPublisher)

  This may be due to: 1. Ink on the Print Tray. Clean any excess ink that has accumulated on the printer tray with rubbing alcohol and a paper towel. Ink can cause the disc to stick on the tray and NOT slide into the correct position for printing. This ...

• How many discs per cartridge can the Bravo/Bravo II print?

    How many discs per cartridge can the Bravo/Bravo II print? This depends on many factors. However, with 100% coverage and printing an even amount of each color at the default resolution of 1200 the Bravo/Bravo II prints approximately 100 to 130 ...

• The power light is flickering/flashing whenever I try to print or when the unit is first turned on. The printer will not print. (Bravo, Bravo II, Bravo XR, Signature)

  The power light is flickering/flashing whenever I try to print or when the unit is first turned on. The printer will not print. (Bravo, Bravo II, Bravo XR, Signature)   The blinking power light indicates that the unit has a cartridge problem. There ...

• My Bravo/Bravo II is only printing half or part of a CD or DVD.

  My Bravo/Bravo II is only printing half or part of a CD or DVD. The solution to your problem depends on what type of error you are getting. Does the Bravo have a flashing cartridge light on the top? If it does, then there is a tray stall of some ...