The AP360/AP362/AP380 is running slower than normal.
The AP360/362/AP380 includes a slower-speed mode that generates more power from the motors for wider label stock. To activate this mode, hold down the Foot Switch while switching on the unit. The Applicator will remain in this mode until it is deactivated. To deactivate this mode, hold down the Foot Switch again while switching on the unit.
High-Speed Mode (default): 5.6 in. [15.2 cm] / second
This mode is used for the most common labels. Labels 6 in. [15.2 cm] or wider or labels with
very aggressive adhesive may cause motor stalling. If you experience motor stalling, switch to
High-Torque Mode.
High-Torque Mode: 3 in. [7.6 cm] / second
This mode provides more motor torque to handle larger supply rolls and the most peel-resistant
labels. To activate High-Torque Mode, hold down the foot switch while switching on the unit.
To switch back to High-Speed Mode, hold down the foot switch again while switching on the
unit.
Article ID: 61035