Tank PEN Mismatch Error (LX3000/LX4000)
This error indicates that the print head ink type (dye or pigment) does not match ink tank types installed. (Note: it is also possible that one of the three in tanks is the wrong type.)
You must match the correct print head with the ink tanks. To fix this, replace the print head with the correct type.
53001 Dye LX3000/LX4000 Print Head matches with:
- 53002 Magenta Dye Tank
- 53003 Yellow Dye Tank
- 53004 Cyan Dye Tank
53005 Pigment LX3000/LX4000 Print Head matches with:
- 53006 Magenta Pigment Tank
- 53007 Yellow Pigment Tank
- 53008 Cyan Pigment Tank
Article ID: 052622B
Related Articles
Ink Tank Missing/Unknown Error (LX3000/LX4000)
Make sure you follow the procedure in the setup video to install the ink tanks properly. If all tanks are installed, and you receive this error, please try the following in this order. 1. Update to the latest firmware. This will ensure you receive an ...
LX 2000/ LX 1000 - Error Message: failed printhead, printfailure impropershutdown
LX2000 - Error Message: failed printhead, print failure improper shutdown Solution 1: Perform a print head alignment described below. This will clear and resolve the mentioned error message and allow you to print. Solution 2: Install a new print ...
Filter Failed message appears in print queue. Eddie or LX Series Printer is not printing. Ventura, Catalina, Big Sur, Monterey, Sonoma and Sequoia require new drivers (Mac).
Try these steps in order. 1. Install the latest version. Occasionally, the driver will be corrupted after an OS update. Download the latest version from the products download page. You can find the latest software for your product at the location ...
BarTender prints 2-3 Labels and then stops, displaying either Error 3700 or Error 3721 (LX Series Printers).
BarTender prints 2-3 Labels and then stops, displaying either Error 3700 or Error 3721 (LX Series Printers). A Windows Automatic Update has caused a problem in the BarTender software which produces this problem. Check out this article on ...
Ink to Low to Prime Error - LX2000
This error typically occurs after installing a new printhead. Printheads come with special Setup ink cartridges that are filled to a specific level to optimize the priming of new print heads. New printheads need to be primed because they must be ...