PTPublisher opens very slowly and/or responds very slowly when any buttons are pressed. (PC)

• Related Articles

• No Robot Found (Error message received after opening PTPublisher for PC)

  No Robot Found (Error message received after opening PTPublisher for PC) This error indicates that the computer is not communicating with: A. the recorder (burning) drive(s) in the robot and/or B. the printer in the robot. C. Both A and B. If this is ...

• How to use Discover files in PTPublisher 4.0 for OS 10.15 Catalina or higher?

  In PTPublisher 4.0 we were forced to remove Discover disc design software because it was a 32-bit application.  Mac OS 10.15 Catalina only supports 64-bit software so this change was necessary to make PTPublisher compatible.  However, you will still ...

• Can I use PTLink to print wirelessly to the IP60 from a Windows PC?

  While PTLink was designed for printing via AirPrint from a iPad or iPhone it is possible to print using AirPrint from a PC.  Follow these instructions: 1. Connect and install the IP60 first via USB using standard installer. 2. Open Devices and ...

• How do I completely remove and reinstall PTPublisher (PC)?

  How do I completely remove and reinstall PTPublisher?  Please use these instructions to completely remove the program. 1. Windows Vista/7/8/10 Go to Start - Control Panel - Uninstall a program.  Find PTPublisher.  Click Uninstall. Windows XP - Go to ...

• How do I run a Tech Support Report (TSR) in PTPublisher? (Mac or PC)

    How do I run a Tech Support Report (TSR) in PTPublisher? (Mac or PC) PC Click on the help "?" icon in the upper right corner of the PTPublisher software to open the Support Center.  Click on the "Create Support Report" button.  In a few moments a ...