PTPublisher for Mac Crashes at startup in OS 26.5 when using Bravo SE-3 or 4200 series disc publishers

• Related Articles

• Filter Failed message appears in print queue. Eddie or LX Series Printer is not printing. Ventura, Catalina, Big Sur, Monterey, Sonoma and Sequoia require new drivers (Mac).

  Try these steps in order. 1. Install the latest version. Occasionally, the driver will be corrupted after an OS update. Download the latest version from the products download page. You can find the latest software for your product at the location ...

• How to use Discover files in PTPublisher 4.0 for OS 10.15 Catalina or higher?

  In PTPublisher 4.0 we were forced to remove Discover disc design software because it was a 32-bit application.  Mac OS 10.15 Catalina only supports 64-bit software so this change was necessary to make PTPublisher compatible.  However, you will still ...

• My image is not printing centered on my discs (Bravo Disc Publisher Series - PTPublisher)

  This may be due to: 1. Ink on the Print Tray. Clean any excess ink that has accumulated on the printer tray with rubbing alcohol and a paper towel. Ink can cause the disc to stick on the tray and NOT slide into the correct position for printing. This ...

• My Bravo 4100 series Disc Publisher or Auto Printer only prints one disc at a time when I print directly from my design program. (Bravo 4100 Series - Mac Only)

    My Bravo 4100 series Disc Publisher or Auto Printer only prints one disc at a time when I print directly from my design program.  (Bravo 4100 Series - Mac Only) When using Mac OS 10.7 or higher you must print using PTPublisher for Mac to print more ...

• The Primera software program does not start or crashes immediately after starting (Any product or software).

  If the Primera software program does not start or crashes immediately after starting, delete the following folders if they exist: At this location: C:\Users\<current user>\AppData\Local App Data is a hidden folder that will need be shown using this ...