PC will not boot up after installing PTPublisher - Error Driver cannot Load on this device (Bravo Disc Publishers)
The error may be related to Px Engine security issues on some PCs with enhanced kernel-level security / core isolation memory protection / memory integrity.
Follow these steps to update the :
- Download the Zip file: https://workdrive.zohoexternal.com/file/8mcka838bc3581759466b9f40b3b0e2ead07e
- Run the EXE file in the zip.
- Copy PXSDKPLS.DLL to C:\Program Files (x86)\Primera Technology\PTPublisher
- Overwrite the existing file.
This updated burn engine adds compatibility with these security features.
Article ID: 101723
Related Articles
My image is not printing centered on my discs (Bravo Disc Publisher Series - PTPublisher)
This may be due to: 1. Ink on the Print Tray. Clean any excess ink that has accumulated on the printer tray with rubbing alcohol and a paper towel. Ink can cause the disc to stick on the tray and NOT slide into the correct position for printing. This ...No Robot Found (Error message received after opening PTPublisher for PC)
No Robot Found (Error message received after opening PTPublisher for PC) This error indicates that the computer is not communicating with: A. the recorder (burning) drive(s) in the robot and/or B. the printer in the robot. C. Both A and B. If this is ...How to connect Multiple Bravo Disc Publishers to the same PC (Bravo SE-3 and 4200 series).
In order to use multiple Printers on the same PC you must change the USB serial number identifier of one of the printers so that the computer recognizes the printers as separate devices. A. Installing the First Printer Driver. Connect only one ...PTPublisher burns the disc but will not print. It burns the disc, but stops after it puts the disc in the print tray. (PC)
PTPublisher burns the disc but will not print. It burns the disc, but stops after it puts the disc in the print tray. (PC) There are several things to check: 1. Paused Printer. Make sure the printer is not paused. Go to Control Panel - ...Can I use PTLink to print wirelessly to the IP60 from a Windows PC?
While PTLink was designed for printing via AirPrint from a iPad or iPhone it is possible to print using AirPrint from a PC. Follow these instructions: 1. Connect and install the IP60 first via USB using standard installer. 2. Open Devices and ...