My Signature Pro is not printing centered.

• Related Articles

• My image is not printing centered on my discs (Bravo Disc Publisher Series - PTPublisher)

  This may be due to: 1. Ink on the Print Tray. Clean any excess ink that has accumulated on the printer tray with rubbing alcohol and a paper towel. Ink can cause the disc to stick on the tray and NOT slide into the correct position for printing. This ...

• How to print cookies of any shape perfectly centered the first time using a custom tray. (Eddie)

  Eddie has built-in automatic centering. But that works best when using the Carousel. If you are printing one cookie at a time in manual printing mode, centering is most reliable when you do not use the automatic centering sensor. Here is what you ...

• The cookie does not print centered. (Eddie).

  A. Try this First Your cookie MUST be touching two triangle spacers. When using the carousel, Eddie will center print images on your cookies automatically but only if your cookie is touching two triangle spacers. (round spacer on earlier models). ...

• Smaller diameter, thin or lighter cookies do not print, the image is overlapping itself, the image is not centered, or Cookie out error. (Eddie).

  The reason for this is not always related to the size but instead, it has more to do with the weight.  These cookies are lighter which can allow the cookie to move slightly as it is being scanned for size.   If the cookie is too small or moves during ...

• My Signature Pro/IV will not print. (Signature Pro/IV Only)

    My Signature Pro/IV will not print. (Signature Pro/IV Only) 1. Verify Printer Functionality. Put a disc in the printer tray. Try printing an internal self-test by unplugging all cables except power from the back of the printer. Now, while holding ...