My printhead or cartridge is defective. What can I do? (LX900 - LX1000 - LX2000)
If you think your cartridge or printhead is defective, please contact tech support to arrange for a replacement. Tech support may ask you to perform troubleshooting before sending a replacement cartridge or printhead.
See this article to view the troubleshooting you will be asked to perform. It is possible that the printhead or cartridge is not defective. This article may actually help solve the problem.
Notes on Ink or Printhead Replacement
- All replacements for defective cartridges or printheads must be processed through Tech Support.
- To receive replacements, you may be required to send in your defective cartridges/Printhead.
- Tech Support will perform the cleaning procedures and tests mentioned in the article above.
- Tech Support will not replace Printheads that display 0% Life Remaining.
- Printheads with life remaining may be replaced depending on the description and circumstances of the failure at the discretion of Primera Tech Support.
- Before a replacement is sent, Primera may attempt to manually clean the print head using an Ultrasonic Jewelry Cleaner following these instructions .
Printhead Life
LX900 - The estimated printhead life is approximately 26 black or 32 (of any) color cartridge changes whichever comes first for or LX900.*
LX2000/LX1000 - Estimated printhead life for the LX2000/LX1000 is 53 black cartridges or 65 (of any) color cartridges for LX2000 whichever comes first.*
*This is not a guarantee of printhead life. The printhead could last longer or shorter than this depending on many environmental and use factors. Print Head life is displayed in the status monitor:
To ensure uninterrupted printing capability, purchase a backup printhead now. You can purchase a printhead from our online store:
LX900 Replaceable Print Head - Part Number 53470
LX2000/LX1000 Replaceable Print Head and Setup Cartridges - Part Number 53467
Related Articles
Poor Quality Printing, Banding, Streaks, Missing Colors. My cartridge is defective. What can I do? (LX810, LX910, LX400, LX500, LX600, LX610, IP60, Bravo series, Eddie)
If the cartridge has not been used for some time, the inkjet nozzles may dry out. 1. Clean / Test Print Print the Clean/Test Print described in this article. Send us a picture of the clean/test print! 2. Clean the Cartridge Manually Remove the ...My Bravo 4100 Series printhead / cartridge is defective. What can I do?
If you think your cartridge/printhead is defective, please contact tech support to arrange for a replacement. Tech support may ask you to perform troubleshooting before sending a replacement cartridge or printhead. See this article to view the ...Discs are printing with poor quality or missing colors. (4100 Series)
Try the following solutions: 1. Change the Cartridge. Check your cartridge levels. If the lowest percentage color corresponds to a missing color in your print, replace that cartridge. Even if the software reports that the cartridge has 30% ink ...LX 2000/ LX 1000 - Error Message: failed printhead, printfailure impropershutdown
LX2000 - Error Message: failed printhead, print failure improper shutdown Solution 1: Perform a print head alignment described below. This will clear and resolve the mentioned error message and allow you to print. Solution 2: Install a new print ...Filter Failed message appears in print queue. Eddie or LX Series Printer is not printing. Ventura, Catalina, Big Sur, Monterey, Sonoma and Sequoia require new drivers (Mac).
Try these steps in order. 1. Install the latest version. Occasionally, the driver will be corrupted after an OS update. Download the latest version from the products download page. You can find the latest software for your product at the location ...