Message: No Robot Connected -or- Nothing happens when you click "GO" (PTPublisher for Mac)

• Related Articles

• No Robot Found (Error message received after opening PTPublisher for PC)

  No Robot Found (Error message received after opening PTPublisher for PC) This error indicates that the computer is not communicating with: A. the recorder (burning) drive(s) in the robot and/or B. the printer in the robot. C. Both A and B. If this is ...

• When I send a job from PTPublisher client to the server nothing happens. (PTPublisher NE)

    When I send a job from PTPublisher client to the server nothing happens.  (PTPublisher NE) PTPublisher run from the client computer needs to be run as an admin on Windows 7 computers. 1.  Go to Computer and browse to C:\Program ...

• How to use Discover files in PTPublisher 4.0 for OS 10.15 Catalina or higher?

  In PTPublisher 4.0 we were forced to remove Discover disc design software because it was a 32-bit application.  Mac OS 10.15 Catalina only supports 64-bit software so this change was necessary to make PTPublisher compatible.  However, you will still ...

• After installing an update, PTPublisher Mac does not correctly identify the drives in my robot. The robot drops a disc but the drive never opens -or- the arm grinds into the top drive -or- projects do not start after clicking GO. (PTPublisher Mac).

    After installing an update, PTPublisher Mac does not correctly identify the drives in my robot.  The robot drops a disc but the drive never opens -or- the arm grinds into the top drive -or- projects do not start after clicking GO. (PTPublisher ...

• “A robot was found but no drive was found” error when opening PTPublisher on Mac.

    “A robot was found but no drive was found” error when opening PTPublisher on Mac.   Typically, this means the drive in the Bravo is not being recognized by the Mac.   Go to Apple – About this Mac – More Info – Hardware - Disc Burning.   You should ...