(Mac Only) My Bravo (not Bravo II) robotic arm is running into the input and output bins as it moves.
(Mac Only) My Bravo (not Bravo II) robotic arm is running into the input and output bins as it moves.
To fix this problem, please contact tech support for a Discribe software upgrade.
This articles applies to MACs only.
Article ID: 44669
Related Articles
The Bravo's robotic arm places a disc into the printer tray, retracts the tray, but immediately ejects the tray without printing. The left (cartridge) light starts flashing.
Article # 207963 - The Bravo's robotic arm places a disc into the printer tray, retracts the tray, but immediately ejects the tray without printing. The left (cartridge) light starts flashing. To fix this issue, Run the Calibrate Last Disc (PC) or ...
Filter Failed message appears in print queue. Eddie or LX Series Printer is not printing. Ventura, Catalina, Big Sur, Monterey and Sonoma require new drivers (Mac).
Try these steps in order. 1. Install the latest version. Occasionally, the driver will be corrupted after an OS update. Download the latest version from the products download page. You can find the latest software for your product at the location ...
My Bravo (SE, SE-3, II, XR, XRP, Pro, Xi-Series, 4100, 4200 Series) is not picking discs or is dropping discs?
Where and How is it failing? First, determine exactly where and how the robot is failing to pick. To do this, operate the unit with the cover open. You will need to trick the lid sensor into believing the unit's cover is still closed. Follow this ...
After installing PTPublisher 1.2.3 or greater the robotic arm continuously checks the bins for media. (BravoPro or XRP only)
After installing PTPublisher 1.2.3 or greater the robotic arm continuously checks the bins for media. (BravoPro or XRP only) Solution: Upgrade the firmware of the unit to the latest version. Firmware Upgrade PageArticle ID: 45047
The drive in the Bravo does not show up as a recorder in Discribe. (BravoPro or II - Mac)
The drive in the Bravo does not show up as a recorder in Discribe. (BravoPro or II - Mac) Try the following suggestions to get the drive recognized. 1. Plugin Sequence. Try this sequence for getting the Mac to recognize the unit's burner drive: ...