LX900 prints the first image with perfect quality but as it prints more it starts to fade.
Solution: New gaskets or a new print head will fix the print quality. It is also possible one of the existing gaskets is out of place.
Instructions:
1. Open the printer cover
2. Remove print head & ink
3. Below the print head there should be circular rubber gaskets.
4). Check if gaskets are damaged or missing.
5). If gaskets are damaged you can purchase a new Pigment
Print head or Dye Print Head. Another option is to purchase a Large
Gasket for the black cartridge slot or a Small
Gasket for the color cartridge slots.
Related Articles
Poor Print Quality, Blurry Printing, Print Smearing, faded prints, or splotchy prints on my Cookie or Food Item. (Eddie)
1. Clean the Cartridge. Follow the procedures in this article to clean the cartridge. However, instead of using alcohol to clean the cartridge, use distilled or bottled water. TEST Prints. Print your design on a cardboard coaster or a piece of ...
What software can I use to print from my Mac to an LX Series Primera Printer?
You can use any app from the Adobe Creative Suite, the Preview app installed on your Mac or Swift Publisher to print from your Mac to your Label Printer. Printing from Swift Publisher Printing from Preview (Below): To get started with the Preview ...
The LX3000 Print Head is printing with Poor Quality, Banding, Streaks, or Missing Colors.
You may need to replace your print head. The nozzles can wear out over time. 1. Clean / Test Print. Print the Clean/Test Print described in this article. Send us a picture of the clean/test print! 2. Ink may not be flowing to the print head from the ...
Discs are printing with poor quality or missing colors. (4100 Series)
Try the following solutions: 1. Change the Cartridge. Check your cartridge levels. If the lowest percentage color corresponds to a missing color in your print, replace that cartridge. Even if the software reports that the cartridge has 30% ink ...
LX Series Printer prints a partial label and restarts/resets in the middle of a job. (LX910, LX3000)
Sometimes the printer will restart if it encounters an error or an interruption in the data flow from the computer over the USB cable. It can be hard to realize that the printer is restarting if you don't see it happen. Instead at the end of the job, ...